Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45

Brodit Active Holder
€310,48 Excl.BTW
Price Summary
- €375,68
- €375,68
- €375,68
Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45
Gerelateerde producten
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Onlangs bekeken
BIXOLON SRP-350plusV, cutter, USB, Ethernet, zwart
bonprinter, direct thermisch, 7 dots/mm (180 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): afsnijdmechanisme, optical sensor, USB (2.0), Ethernet, RAM: 64 MB, Flash: 64 MB, BXL/POS, toebehoren, incl.: voeding, netsnoer, bonrol, kleur: zwart
KOAMTAC RFID adapter
RFID adapter, 0.5 W, UHF, fits for: KDC470
Colormetrics P1000, 38.1 cm (15”), Projected Capacitive, SSD
POS System, Touchscreen, Projected Capacitive, 38.1 cm (15”), 1024×768 pixels, Intel Celeron Quad Core, 2.0 GHz, RAM: 4 GB, SSD: 120 GB, USB (5x), RS232 (2x), Ethernet (10/100/1000 Mbit), drawer kickout (RJ11), audio, VGA, brightness: 300cd, incl.: power supply unit, power cable, order separately: operating system
Honeywell Vehicle Cradle
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Zebra MC9300, 2D, ER, SE4850, BT, Wi-Fi, Func. Num., Gun, IST, Android
portable data collection device, 2D, imager (extended range, SE4850), keypad (34 keys, Functional Numeric), pistol grip, Interactive Sensor, 10,9cm (4,3”), Bluetooth, Wi-Fi (802.11ac), Micro SD-Slot, 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, IP67, incl.: battery, 7000 mAh
KOAMTAC safe glove, large (L)
Safe glove, large (L), fits for: KDC180
Epson, labelrol, synthetisch, 102mm
Epson, labelrol, synthetisch (polypropyleen), premium mat gecoat, rol breedte: 102mm, lengte: 55m
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Elo 0702L, 17.8cm (7”), Projected Capacitive, 10 TP
touch monitor (aspect ratio: 5:3), 17.8cm (7”), Touchscreen, Projected Capacitive, multi touch (10 points), 800×480 pixels, VESA mount (75×75 mm), 25ms, brightness: 430cd, viewing angle: 150/120°(H/V), contrast: 800:1, USB (micro-USB), touch interface: USB, IP54, incl.: cable (USB, Micro ), QSG
Zebra battery charging station, 4 slots
Battery charging station, 4 slots, incl.: power supply, DC cable, order separately: power cord (C13), fits for: MC9000, MC9100, MC9200







