Active Holder with cig-plug, 3A 12/24V, requires Mobilis protective case, fits for: TC21, TC26

Brodit Active Holder
€98,67 Excl.BTW
Price Summary
- €119,39
- €119,39
- €119,39
Active Holder with cig-plug, 3A 12/24V, requires Mobilis protective case, fits for: TC21, TC26
Gerelateerde producten
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit wingnut
Wingnut, for Pedestal Mount
Onlangs bekeken
Elo stand
Stand, VESA: 75, incl.: I/O Hub (2x USB-A 2.0, 2x USB-A 3.0, 1x powered-USB 24V, 2x powered-USB 12V, 1x USB-C, 1x cash drawer connector, 2x RS232 (RJ45)), power suuply, power cord (EU, US), connection cable (RS232), fits for: I series 2.o Windows
KOAMTAC RFID adapter
RFID adapter, 0.5 W, UHF, fits for: KDC470
Elo EMV cradle
EMV Cradle, for Ingenico RP757, fits for: 15 and 22 inch I-series
Getac stylus, digitizer
Stylus, digitizer, fits for: F110, V110 G4/G5
Printronix interface card GPIO
Interface card GPIO, fits for: T8000 series, T6000e series
POSPOLE base pole
Base pole, diamter: 45 mm, default cutout, height: 400 mm, incl.: top cover, bottom cover, 4x M6 50mm screw, 4x 6,4 steel washer, 4x M6 bolt nut, 4x C4.8×16 screw, 1x hex screwdriver, colour: black
8675i Lanyard Conversion Kit
Kit to convert glove or triggered ring to lanyard version with trigger, 5 peaces, fits for: 8675i (glove or ring option)




