Holder, passive, drilling: AMPS, incl.: tilt swivel, fits for: TC22/TC27

Brodit holder, passive
€34,14 Excl.BTW
Price Summary
- €41,31
- €41,31
- €41,31
Holder, passive, drilling: AMPS, incl.: tilt swivel, fits for: TC22/TC27
Gerelateerde producten
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Onlangs bekeken
Windows 11 IoT Ent., Entry
Windows 11 IoT Enterprise, Entry, incl. Installation (only available with POS-system)
Evolis kleurenlint (YMCKO)
Evolis kleurenlint (YMCKO), geschikt voor: Pebble+lt;sup+gt;4+lt;/sup+gt;, Dualys+lt;sup+gt;3+lt;/sup+gt;, Securion, tot 200 kaarten
Zebra Single Ethernet Cradle, EU
Single Ethernet Cradle, EU, incl.: 25W power supply, for Zebra QLn220, QLn320, ZQ610, ZQ620
Zebra RFD90, RFID (UHF)
RFID Reader/Writer, Long range linear polarized Yagi antenna, UHF (800MHz), Bluetooth, WiFi, IP65, SE4850, Reading rate: 1300 tags/sec, incl.: incl.: Battery (7000 mAh, Li-Ion)
Labelmate CAT-3-CHUCK
Labelmate CAT-3-STANDARD, Industry Standard Heavy-duty label rewinder, core holder: 76 mm, max. roll diameter: 300 mm, max. roll width: 170 mm, speed: 125 cm/sec., incl.: Quick-Chuck
Elo EMV cradle
EMV Cradle, for Ingenico RP757, fits for: 15 and 22 inch I-series



