Holder, tilt swivel, fits for: SL10 (with rugged boot)

Brodit holder, TS, SL10
€32,74 Excl.BTW
Price Summary
- €39,61
- €39,61
- €39,61
Holder, tilt swivel, fits for: SL10 (with rugged boot)
Gerelateerde producten
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Onlangs bekeken
BIXOLON SPP-R200IIIPLUS, 8 dots/mm (203 dpi), USB, RS232, BT (iOS, 5.0)
mobiele printer, printer type, direct thermisch, resolutie, resolutie: 8 dots/mm (203 dpi), papier/ mediabreedte, mediabreedte (max): 58mm, printbreedte (max.): 48 mm, diameter rol (max.): 40mm, snelheid(max): 90 mm/sec., interfaces, USB, RS232, Bluetooth (iOS, klasse 5.0), Geheugen, RAM: 8 MB, Flash: 4 MB, OS/ emulatie, emulatie, BXL/POS, toebehoren, incl.: voeding, netsnoer, riem clip, accu, 1200 mAh
Zebra DS457-SR, SE4500, 2D, SR, Dual-IF, zwart
Inbouw scanner, 2D , imager (Standard range), dual interface (RS232, USB), IP54, afmetingen (BxHxD): 62×29,2×58,4mm, apart bestellen, interface kabel, kleur: zwart
Diebold Nixdorf hard disk, SSD, 256 GB, Field Upgrade Kit
Hard disk, SSD, M.2, 256 GB, Field Upgrade Kit
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Mobilis carring case
Carring case, incl.: belt clip, shoulder strap, fits for: MC32 (gun, standard battery)
Diebold Nixdorf BA90, 20.3 cm (8”), zilver
Klantendisplay, 20.3 cm (8”), resolutie: 800×600 pixels, helderheid: 210cd, contrast: 500:1, aansluiting: DVI, apart bestellen, interface kabel, voeding, netsnoer, stand, kleur: zilver
Printronix font card
Font card (Japanese Andale), fits for: T8000
iiyama ProLite B19, 48.3 cm (19”), kabel, wit
TFT monitor, 5:4, schermgrootte, 48.3 cm (19”), resolutie: 1280×1024 pixels, VESA mount (100×100 mm), verstelbare standaard, responstijd: 5ms, helderheid: 250cd, kijkhoek: 178/178°(H/V), contrast: 1000:1, aansluiting: DVI, VGA, incl.: kabel (DVI), voeding, netsnoer, QSG, kleur: wit
Zebra spare battery
Spare battery, fits for: ZQ630, QLn420
Zebra ZXP 3 inktlint: YMCKOK
Zebra inktlint YMCKOK met overcoat, tbv 165 kunstof kaarten, tbv Zebra ZXP 3
Brodit holder, TS, TC21, TC26
Holder, tilt swivel, fits for: TC21, TC26
Datalogic charging-/communication station, 3 slots, ethernet
Charging-/communication station, 3 slots, ethernet, order separately: power supply, power cord, fits for: Skorpio X5
Honeywell stand, grey
Stand, 15 cm, oval stand, weighted base, color: grey, fits for: 1250g, 1450g









