Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)

Brodit holder, with lock, ET5X (8”) (protective case)
€438,60 Excl.BTW
Price Summary
- €530,71
- €530,71
- €530,71
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Gerelateerde producten
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Onlangs bekeken
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Honeywell FlexDock Dual Dock, Ethernet
FlexDock Dual dock, Ethernet 2x RJ45 down/upstream, for Honeywell CN7X, 7Xe, incl.: power supply, please order separately: power cord
Zebra RS6100, Enterprise Hand Mount, BT, 2D, BT, ext. bat.
Bluetooth scanner, 2D, imager (SE5500), trigger, Bluetooth, incl.: battery, extended, 735mAh, order separately: charging cradle, Hand strap, operating: -30° up to +50°C
brodit power supply, Zebra ET55
power supply, 12V with EU-plug (C13), fits for: Zebra ET55 8.3”
Zebra neck cord lanyard
Neck cord lanyard , incl.: case, fits for: CS60
Elo 0702L, 17.8cm (7”), Projected Capacitive, 10 TP
touch monitor (aspect ratio: 5:3), 17.8cm (7”), Touchscreen, Projected Capacitive, multi touch (10 points), 800×480 pixels, VESA mount (75×75 mm), 25ms, brightness: 430cd, viewing angle: 150/120°(H/V), contrast: 800:1, USB (micro-USB), touch interface: USB, IP54, incl.: cable (USB, Micro ), QSG
Zebra connection cable, RS-232
Connection cable, RS-232, length: 2 m, straight, TxD on PIN 2, order separately: power supply, DC cable, power cord
Datalogic spare battery
Spare battery, extended, 6200 mAh, fits for: Skorpio X5
Conversie kit B tbv K-1
K-1 features 4 verticale en 2 horizontale biljetvakken. Indien gewenst naar have 8 verticale biljetvakken te creeren, bestel dan deze kit
Honeywell 3320g, 2D, multi-IF, kabel (USB), wit
miniatuur scanner, 2D , imager, max. 43cm leesafstand, multi interface (RS232, KBW, USB), protection class: IP53, incl.: kabel (USB, wit), kleur: wit
Datalogic Charging/Communication Station
Charging/Communication Station, Ethernet, 433MHz, order separately: connection cable, fits for: PM9600
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply








