Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320

Brodit mount, MMC, PM, QLn320
€154,45 Excl.BTW
Price Summary
- €186,88
- €186,88
- €186,88
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Gerelateerde producten
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Onlangs bekeken
Zebra hand strap M/L
Zebra spare hand strap in M/L, fits for: WT6000
TSC Environmental case
Environmental case, IP54, incl.: shoulder strap
M3 Mobile charging-/communication station, Ethernet, USB
Charging-/communication station, Ethernet, USB, charges 1x device, 1x spare battery, order separately: power supply, power cord, fits for: US20
Preh key Set
Preh key set van A naar Z en Umlaut, kleur: wit
Zebra RFID upgrade kit
RFID upgrade kit, fits for: ZT610
Bixolon XM7-20, USB-C, RS232, BT (iOS), Wi-Fi, 8 dots/mm (203 dpi), display, ZPLII, CPCL
label printer, mobile printer, direct thermal, resolution: 8 dots/mm (203 dpi), media width (max.): 58 mm, print width (max.): 48 mm, roll diameter (max.): 57 mm, speed (max.): 152 mm/s, USB-C, RS232, Bluetooth (iOS), Wi-Fi (802.11a/b/g/n), LCD Display, Black Mark Sensor, Gap Sensor, emulation: ZPLII, BXL/POS, SLCS, CPCL, RAM: 128 MB, Flash: 256 MB, incl.: power supply unit, power cable, belt strap, battery, 2850mAh
Elo OPS adaptor kit
OPS adaptor kit, fits for: IDS 02 Series
Honeywell Compact 4 Mobile Mark III, 12 dots/mm (300 dpi), RTC, DPL, PL-Z, LP, USB, RS232, Ethernet, Wi-Fi
label printer, mobile printer, direct thermal, resolution: 12 dots/mm (300 dpi), media width (max.): 115 mm, print width (max.): 104 mm, speed (max.): 125mm/sec., USB, RS232, Ethernet, Wi-Fi (802.11a/b/g/n), emulation: DPL, PL-Z, Labelpoint, real time clock, incl.: cable (RS232)
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Bixolon XD3-40t, 8 dots/mm (203 dpi), peeler, EPL, ZPLII, USB, RS232, Ethernet, zwart
label printer , thermal transfer, resolutie: 8 dots/mm (203 dpi), mediabreedte (max): 118 mm, printbreedte (max.): 104mm, diameter rol (max.): 127mm, snelheid(max): 127 mm/sec., USB (type B), RS232 (9 pins), Ethernet, emulatie, EPL, ZPLII, SLCS, RAM: 64 MB, Flash: 128 MB, peeler, Black Mark Sensor, Gap Sensor, incl.: kabel (USB), voeding, netsnoer, kleur: zwart







