Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes

Brodit pedestal mount , 6.5
€29,72 Excl.BTW
Price Summary
- €35,96
- €35,96
- €35,96
Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes
Gerelateerde producten
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit charging station, TC21/26
Charging station, desktop, fits for: Zebra TC21/TC26
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
labelrol, synthetisch, 57x32mm
labelrol, synthetisch (polyester), glanzend, voor desktop-printers, kern: 25.4mm, diameter: 127mm, afmetingen (WxH): 57x32mm, 2200 Etiketten/ rollen
Datalogic Magellan 9300i/9400i, 2D, multi-IF
Inbouw scanner, retail, 2D, imager, saffier glas, short platter, Shelf Mount, interfaces, multi interface (RS232, USB, IBM), toebehoren, incl.: voeding, optinionele toebehoren, apart bestellen, interface kabel, netsnoer
Datalogic Memor K, 2D, 10.5 cm (4”), num., USB-C, BT, WLAN, NFC, Android
Mobiele dataterminal, 2D, imager, schermgrootte, 10.5 cm (4”), resolutie, resolutie: 800×480 pixels, Diversen (eigenschappen/kenmerken), keypad (numeriek), Green Spot, Camera (8MP, auto focus), interfaces, USB-C, Bluetooth, WLAN (802.11ac), NFC, Micro SD-Slot, processor (Qualcomm Octa Core, 2.0 GHz), Geheugen, RAM: 3GB, Flash: 32 GB, OS/ emulatie, Android (9.0), toebehoren, incl.: accu, hand riem, beschermingsgraad, protection class: IP54
Zebra cleaning kit
Cleaning kit, contains 4 print engine cleaning cards and 4 feeder cleaning cards(1000 prints/card) fits for Zebra ZXP Series 1
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
TSC PEX-2260R
PEX-2260R, RIGHT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Datalogic PM9501-DK, 2D, AR, multi-IF, disp., RB
cordless scanner, industry, 2D, imager (Auto Range), keypad (16 keys), Green Spot, 3GL, display, multi-interface (RS232, KBW, USB, RS485), cordless, 433 MHz, IP65, incl.: desk-/wall holder, holster, removable battery, order separately: interface cable, charging/transmitter cradle
Zebra reinigings watten tip swabs
Printkop reinigings watten tip swabs, verpakking van 6stuks
Binnenbak tbv standaard en MINI
8 verwijderbare Conversie/4 bankbiljetten vakken, 1 Cheque vak, geschikt voor STD2000-0268/0197, MINI-0230/0231







