Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes

Brodit pedestal mount , 6.5
€29,72 Excl.BTW
Price Summary
- €35,96
- €35,96
- €35,96
Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes
Gerelateerde producten
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Onlangs bekeken
Zebra Vehicle Cradle
Vehicle Cradle, active, AMPS holes, compatible with/without Rugged Boot/Exoskeleton/Hand Strap, Stylus-Holder, fits for: TC53/TC58
Honeywell Vehicle Cradle
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Labelmate power supply
Power supply, 220-240V, 50 Hz, output: 15 V – 3 A, included with CAT/ UCAT-3/ UCAT-40/ LD series, fits for: CAT, UCAT-3, UCAT-40, LD series
Zebra battery charging station, 4-slot
Battery charging station, slots: 4, fits for: WT6000, RS6000, order separately: power supply, power cord
Honeywell CT60 XP, 2D, BT, Wi-Fi, 4G, NFC, Android
portable data collection device, 2D, imager (FlexRange), Cam (13MP), 11,9cm (4,7”), Bluetooth, Wi-Fi (802.11ac), 4G (LTE), NFC, 1280×720 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), IP68, ATEX, incl.: battery, 4000mAh
KOAMTAC 5-Slot Charging Cradle
Charging Cradle, for 5 devices and extended batteries, EU, fits for: XCover 6 Pro (Case)
Getac power supply
Power supply, 90 W, incl.: power cord (EU)
Getac ZX70 G2, 17.8cm (7”), GPS, USB, BT, WLAN, Android
Tablet PC, schermgrootte, 17.8cm (7”), Touch technologie, Touch screen, capacitieve, resolutie, 1280×720 pixels, Diversen (eigenschappen/kenmerken), GPS, Camera (12 MP), front camera (8MP), interfaces, USB (2x), Bluetooth, WLAN (802.11ac), Micro SD-Slot, processor (Qualcomm Octa Core, 1,9 GHz), Geheugen, RAM: 4GB, Flash: 64 GB, OS/ emulatie, Android (9.0), toebehoren, incl.: voeding, netsnoer (EU, UK), accu, 8400 mAh, beschermingsgraad, IP67, MIL-STD 810H
CT-E301, USB, 8 dots/mm (203 dpi), cutter, zwart
bonprinter , direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): 250 mm/sec., USB (type B), kassa aansluiting, afsnijdmechanisme, desinfecteerbare behuizing, Flash: 8 MB, incl.: stroomvoorziening: (voeding, netsnoer), QSG, kleur: zwart
Stand tbv Zebra LS1203, zwart
Flexible Gooseneck stand hands-free tbv Zebra LS1203, kleur: zwart
M3 Mobile charging/transmitter station, ethernet
charging/transmitter station, 1x SM15, 1x spare battery, fast charging, ethernet, order separately: power supply, fits for: SM15
Zebra RFID, ZBR2000 / UCODE 8, Z-Select 2000T, labels, normal paper, 148x210mm
Z-Select 2000T, labels, normal paper, coated, for midrange/high end printers, thermal transfer, core: 76mm, diameter: 200mm, dimensions (WxH): 148x210mm, rec. ribbon: 2100 wax, 2300 wax, 3200 wax/resin, 3400 wax/resin, 5555 wax/resin









