Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes

Brodit pedestal mount , 6.5
€29,72 Excl.BTW
Price Summary
- €35,96
- €35,96
- €35,96
Pedestal mount 6.5”, total length: 165 mm, with ball and wing nut, AMPS holes
Gerelateerde producten
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Onlangs bekeken
Elo 1590L rev. B, 38.1 cm (15”), Projected Capacitive
touch monitor (open-frame, 4:3), 38.1 cm (15”), Projected Capacitive, 1024×768 pixels, 16ms, contrast: 700:1, VGA, display-poort, HDMI, touch interface: USB, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
KOAMTAC finger trigger glove, XSmall (R)
KOAMTAC finger trigger glove, XSmall (R), fits for: KDC180
Getac battery charging station, 2 slots, EU
battery charging station, 2 slots, incl.: power supply, power cord (EU), fits for: S410 G3
TSC Printhead, 8 Dots/mm (203dpi), MH241
Printhead, 8 Dots/mm (203dpi), for: MH241T, MH241P
APG »CostPlus« SL3000, antraciet
kassalade, opening voorzijde, 446x107x410mm, 5 biljet compartimenten, 8 munt compartimenten, 2 cheque compartimenten, 3-pos. Slot, slotvergrendeling met meerdere posities, 75 series, kleur: antraciet
Datalogic QuickScan QD2500, 2D, multi-IF, Digimarc, kabel (USB), zwart
handscanner, 2D , imager, Digimarc, multi interface (RS232, KBW, USB), protection class: IP52, incl.: kabel (USB, rechte, 2 m, zwart), kleur: zwart
ProGlove Index handstrap (L), pack of 10
Index handstrap, left hand, pack of 10, size: L, fits for: MARK 2, MARK Basic
Datalogic PBT9600, BT, 2D, HP, BT (5.0), multi-IF
Bluetooth scanner, 2D, imager (high Performance), Diversen (eigenschappen/kenmerken), incl.: vibratie/ trilling, interfaces, Bluetooth (klasse 5.0), multi interface (RS232, USB), toebehoren, incl.: batterij, 3350mAh, beschermingsgraad, protection class: IP65, IP67
POSPOLE Basic variant 2
Basic variant, single arm, VESA-Mount, color: black
BIXOLON SRP-350plusV, cutter, USB, Ethernet, zwart
bonprinter, direct thermisch, 7 dots/mm (180 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): afsnijdmechanisme, optical sensor, USB (2.0), Ethernet, RAM: 64 MB, Flash: 64 MB, BXL/POS, toebehoren, incl.: voeding, netsnoer, bonrol, kleur: zwart
Getac Havis vehicle charging station, Tri Pass-through
Havis vehicle charging station, 2x USB 2.0, 1x USB 3.0, 1x USB 3.0 fast charging, 1x Ethernet, 1x RS232, VESA: 75 x 75, Tri Pass-through, order separately: power supply, fits for: UX10









