Pedestal mount 7.5” with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes

Brodit pedestal mount , 7.5
€38,83 Excl.BTW
Price Summary
- €46,98
- €46,98
- €46,98
Pedestal mount 7.5” with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes
Gerelateerde producten
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Onlangs bekeken
Elo 1790L rev. B, 43.2 cm (17”), IT
touch monitor (open-frame, 5:4), 43.2 cm (17”), IntelliTouch, 1280×1024 pixels, 5ms, contrast: 800:1, VGA, display-poort, HDMI, touch interface: USB, RS232, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
Datalogic PM9600-HP, 1,8 Zoll OLED Display, 2D, RB
cordless scanner, industry, 2D, imager, 4 keys, cordless, 433 MHz, IP65, IP67, incl.: battery, 3300mAh, removable battery
KOAMTAC safe glove, large (L)
Safe glove, large (L), fits for: KDC180
TSC Alpha-30R, Basic, USB, BT, WLAN, NFC, 8 dots/mm (203 dpi), display, zwart
mobiele printer, direct thermisch, resolutie: afdruk, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 57 mm, snelheid(max): 127 mm/sec., USB, Bluetooth, WLAN (802.11ac), NFC, keypad (3 functietoetsen), incl.: LCD Display, RAM: 128 MB, Flash: 128 MB, incl.: voeding (EU), riem clip, batterij, QSG, kleur: zwart
Datalogic PBT9600, BT, 2D, HP, BT (5.0), multi-IF
Bluetooth scanner, 2D, imager (high Performance), Diversen (eigenschappen/kenmerken), incl.: vibratie/ trilling, interfaces, Bluetooth (klasse 5.0), multi interface (RS232, USB), toebehoren, incl.: batterij, 3350mAh, beschermingsgraad, protection class: IP65, IP67
KOAMTAC charging station, 4 slots
Charging station, 4 slots, incl.: power supply, power cord (EU, UK), fits for: KDC470
Evolis UltraClean, reinigings kit
tbv de complete printer reinigingskit voor uw Evolis kaart printer: 5 pre-saturated reinigings kaarten, 5 swabs, 1 verpakking van 60 pre-saturated reinigings cloths
PrehKeyTec MCI 128, num., MSL, USB, wit
Toetsenbord, programmeerbaar, 128 toetsen, numeriek, magneetstriplezer, USB, incl.: sleutelset, kleur: wit
Zebra RS5100, BT, 2D, SE4770, BT, black, silver
Bluetooth scanner, 2D, imager (SE4770), OCR, Bluetooth (class 5.2), protection class: IP65, order separately: battery, charging cradle, charging cable, Trigger, Hand strap, colour: black, silver








