Mobiele dataterminal, 2D, imager, schermgrootte, 10.5 cm (4”), resolutie, resolutie: 800×480 pixels, Diversen (eigenschappen/kenmerken), keypad (numeriek), Green Spot, Camera (8MP, auto focus), interfaces, USB-C, Bluetooth, WLAN (802.11ac), NFC, Micro SD-Slot, processor (Qualcomm Octa Core, 2.0 GHz), Geheugen, RAM: 3GB, Flash: 32 GB, OS/ emulatie, Android (9.0), toebehoren, incl.: voeding, Laadstation, accu, hand riem, protective case, beschermingsgraad, protection class: IP54
Datalogic Memor K, 2D, 10.5 cm (4”), num., USB-C, BT, WLAN, NFC, Android
€832,13 Excl.BTW
Price Summary
- €1.006,88
- €1.006,88
- €1.006,88
Mobiele dataterminal, 2D, imager, schermgrootte, 10.5 cm (4”), resolutie, resolutie: 800×480 pixels, Diversen (eigenschappen/kenmerken), keypad (numeriek), Green Spot, Camera (8MP, auto focus), interfaces, USB-C, Bluetooth, WLAN (802.11ac), NFC, Micro SD-Slot, processor (Qualcomm Octa Core, 2.0 GHz), Geheugen, RAM: 3GB, Flash: 32 GB, OS/ emulatie, Android (9.0), toebehoren, incl.: voeding, Laadstation, accu, hand riem, protective case, beschermingsgraad, protection class: IP54
Gerelateerde producten
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Onlangs bekeken
ratiotec RS 2000
Money Scale, bank notes, coins, display, standby mode, incl.: power supply unit, power cable (EU, UK)
Zebra keyboard, ES
Keyboard, 2-in-1, ES, fits for: ET51/ET56 (10”)
KOAMTAC power supply, UK
KOAMTAC power supply, incl.: power cord (UK), fits for: 5 slot charging station
Labelmate CAT-3-10-INCHES
Labelmate CAT-3-10-INCHES, Industry Standard Heavy-duty label rewinder, core holder: 76 mm, max. roll diameter: 300 mm, max. roll width: 255 mm, speed: 125 cm/sec.
Getac vehicle power supply
Vehicle power supply, cigarette lighter, 11-16 V, 22-32 VDC, 120 W
Datalogic voeding, USB
Power supply, Micro USB, charge direct to device
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Zebra belt clip, pack of 5
Belt clip, pack of 5, fits for: ZQ510, ZQ520




