portable data collection device, 1D, imager, keypad (38 keys, Functional Numeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64

Datalogic Skorpio X4, 1D, imager, USB, RS232, BT, Wi-Fi, Func. Num., Android
€1.203,74 Excl.BTW
Price Summary
- €1.456,53
- €1.456,53
- €1.456,53
portable data collection device, 1D, imager, keypad (38 keys, Functional Numeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64
Gerelateerde producten
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Onlangs bekeken
Zebra printkop, 8 dots/mm (203dpi)
Printkop (spare) tbv Zebra label printer GX/GK420t, ZD500, resolutie 8 dots/mm (203dpi)
Datalogic PowerScan PD9531, 2D, SR, multi-IF, kabel (USB), zwart, geel
handscanner, industrie, 2D , imager (Standard range), 3GL, multi interface (RS232, KBW, USB), IP65, incl.: kabel (USB), kleur: zwart, geel
CT-E301, USB, 8 dots/mm (203 dpi), cutter, wit
bonprinter , direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): 250 mm/sec., USB (type B), kassa aansluiting, afsnijdmechanisme, desinfecteerbare behuizing, Flash: 8 MB, incl.: stroomvoorziening: (voeding, netsnoer), QSG, kleur: wit
Brodit pedestal mount , 7.5
Pedestal mount 7.5” with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes
Bixolon XT3-43, 12 dots/mm (300 dpi), display, USB, USB Host, RS232, Ethernet
thermal transfer, resolution: 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 108 mm, roll diameter (max.): 203mm, ribbon core: 25,4mm, speed (max.): 152 mm/s, connection: USB, USB Host, RS232, Ethernet, RAM: 128 MB, Flash: 128 MB, keypad (qQ): incl.: LCD Display, incl.: cable (USB), power supply: (power supply unit, power cable), QSG
Zebra NX 6500
WLAN controller, supports up to 264 access points, HDD: 500GB, RAM: 16 GB, CPU: Quad-core, 4x USB, 4x Expansion Slots, 1x Console (RJ45), 2U rack-mount
Datalogic connection cable, RS232
Connection cable, RS232 (9 PIN, female), coiled, length: 2.4 m
Honeywell Vehicle Cradle
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Epson ink cartridge, black
Ink cartridge, DURABrite Ultra, colour: black, fits for: ColorWorks C7500
Printronix print head, 8 dots/mm (203dpi)
Print head, 8 dots/mm (203dpi), fits for: T5204r, SL5204r





