portable data collection device, 1D, imager, keypad (38 keys, Functional Numeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64

Datalogic Skorpio X4, 1D, imager, USB, RS232, BT, Wi-Fi, Func. Num., Android
€1.203,74 Excl.BTW
Price Summary
- €1.456,53
- €1.456,53
- €1.456,53
portable data collection device, 1D, imager, keypad (38 keys, Functional Numeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64
Gerelateerde producten
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Onlangs bekeken
Metapace S-52, 2D, USB, kabel (USB), zwart
handscanner, retail, 2D , imager, USB, incl.: kabel (USB), QSG, kleur: zwart
Honeywell 1990i, 2D, XLR, multi-IF
handheld scanner, 2D, imager (extre long range), vibration, multi-interface (RS232, KBW, USB), IP65, IP67, order separately: interface cable
Citizen reinigings pen
Kop reinigings pen, tbv Citizen CL-S en CLP label printers, verpakking van 10
M3 Mobile Snap-on
Snap-on, RFID (UHF), fits for: SM15
KOAMTAC RFID adapter
RFID adapter, 0.5 W, UHF, fits for: KDC470
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Zebra Printhead Xi-ser. 8 dots/mm (203dpi)
Printhead-Kit (spare) for Zebra label printer 220Xi4, 8 dots/mm (203dpi)
Elo 1790L rev. B, 43.2 cm (17”), IT
touch monitor (open-frame, 5:4), 43.2 cm (17”), IntelliTouch, 1280×1024 pixels, 5ms, contrast: 800:1, VGA, display-poort, HDMI, touch interface: USB, RS232, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
Datalogic Gryphon GPS4421, 2D, USB, kabel (USB), wit
Presentatie scanner, retail, 2D , imager, trigger, USB, IP52, incl.: kabel (USB), tafelmontage, kleur: wit
Glancetron 8005-1 RS 232 opener
If the cash drawer is not connected via a POS printer but rather via RS-232, the Glancetron interface 8005-1 is required, order separately: power supply
Mobilis Protective Case
Protective Case, reinforced, with Kickstand and Hand Strap, fits for: Galaxy Tab A8
Getac Brodit vehicle holder
Brodit vehicle holder, drilling: AMPS / VESA 75/100, order separately: vehicle mount, fits for: F110
Honeywell spare battery, extended, 2 pcs.
Spare battery, extended, 2 pcs., 8850 mAh, order separately: battery door









