portable data collection device, 1D, imager, keypad (50 keys, alphanumeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64

Datalogic Skorpio X4, 1D, imager, USB, RS232, BT, WLAN, alfa, Android
€1.203,74 Excl.BTW
Price Summary
- €1.456,53
- €1.456,53
- €1.456,53
portable data collection device, 1D, imager, keypad (50 keys, alphanumeric, backlight), Green Spot, touch screen, 8,1 cm (3,2”), USB, RS232, Bluetooth, Wi-Fi (802.11a/b/g/n, CCXv4), Micro SD-Slot (max. 32GB), resolution: 240×320 pixels, TI OMAP 4, 1GHz, RAM: 1 GB, Flash: 8GB, Android (4.4), IP64
Gerelateerde producten
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Onlangs bekeken
iiyama ProLite B19, 48.3 cm (19”), kabel, wit
TFT monitor, 5:4, schermgrootte, 48.3 cm (19”), resolutie: 1280×1024 pixels, VESA mount (100×100 mm), verstelbare standaard, responstijd: 5ms, helderheid: 250cd, kijkhoek: 178/178°(H/V), contrast: 1000:1, aansluiting: DVI, VGA, incl.: kabel (DVI), voeding, netsnoer, QSG, kleur: wit
Deksel tbv K-1 inzet
Afsluitbare Deksel tbv K-1 inzet. alle lids hebben hetzelfde slot
POSPOLE Basic variant 2
Basic variant, single arm, VESA-Mount, color: black
Bixolon belt strap, pack of 10
Belt strap, pack of 10, order separately: belt clip, fits for: SPP-R210, SPP-R200III, SPP-R310, SPP-R410
KOAMTAC charging station, 5 slots
Charging station, 5 slots, incl.: power supply, power cord (UK), fits for: XCover 5 SmartSled
Zebra Printkop 105SL, 8 dots/mm (203dpi)
Printhead (spare), 8 dots/mm (203dpi), fits for: 105SL
KOAMTAC charging station, 4 slots
Charging station, 4 slots, incl.: power supply, power cord (EU, UK), fits for: KDC470
Citizen CL-H300SV, 8 dots/mm (203 dpi), USB, wit
label printer , retail, gezondheidszorg, desktopprinter, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 118 mm, printbreedte (max.): 104mm, diameter rol (max.): 127mm, snelheid(max): 200 mm/s, USB, RAM: 32 MB, Flash: 16 MB, Black Mark Sensor, Gap Sensor, incl.: voeding, netsnoer (UK), QSG, kleur: wit
KOAMTAC protection case
Protection case, fits for: KDC270
Diebold Nixdorf BA92, 30,7cm (12,1”), Projected Capacitive, zwart
4:3, Klantendisplay, 30,7cm (12,1”), Touch screen , Projected Capacitive, resolutie: 800×600 pixels, helderheid: 400cd, contrast: 800:1, aansluiting: USB (Type A, type B), DVI, VGA, apart bestellen, interface kabel, voeding, netsnoer, stand, kleur: zwart








