Display protection film, fits for: F110 G4, F110 G5, F110 Ex
Getac display protection film
€31,53 Excl.BTW
Price Summary
- €38,15
- €38,15
- €38,15
Display protection film, fits for: F110 G4, F110 G5, F110 Ex
Gerelateerde producten
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Onlangs bekeken
KOAMTAC hand strap
Hand strap, fits for: KDC470 (with pistol grip)
BIXOLON SRP-350plusV, cutter, USB, Ethernet, zwart
bonprinter, direct thermisch, 7 dots/mm (180 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): afsnijdmechanisme, optical sensor, USB (2.0), Ethernet, RAM: 64 MB, Flash: 64 MB, BXL/POS, toebehoren, incl.: voeding, netsnoer, bonrol, kleur: zwart
APG »CostPlus« SL3000, zwart
kassalade, opening voorzijde, 446x107x410mm, 5 biljet compartimenten, 8 munt compartimenten, 2 cheque compartimenten, open behuizing, kleur: zwart
Datalogic PM9501, 2D, SR, multi-IF, kabel (RS232), RB
draadloze scanner, industrie, 2D , imager (Standard range), Green Spot, 3GL, multi interface (RS232, KBW, USB, RS485), draadloos, 433 MHz, IP65, incl.: kabel (RS232, rechte, 1,8 m), voeding, netsnoer (EU), cradle, verwijderbare batterij
Zebra ZB200
Bridge for automatic upload of data from ZS300 sensors, Bluetooth, Wi-Fi (802.11ac), Ethernet, IP50
Evolis colour ribbon (monochrome), black
Evolis colour ribbon (monochrome), fits for: Badgy200, for up to 500 cards, colour: black
Star CB-2002 FN, zwart
kassalade, opening voorzijde, afmetingen (BxHxD): 410x114x415mm, invoeren: 4 biljet compartimenten (horizontaal), 8 munt compartimenten, 1 cheque compartiment, 3-pos. Slot, directe printeraansluiting, kleur: zwart
Honeywell CK65, 2D, SR, 10.5 cm (4”), large numeric, BT, WLAN, Android, GMS
Mobiele dataterminal, 2D, imager (Standard range), schermgrootte, 10.5 cm (4”), resolutie, 480×800 pixels, Diversen (eigenschappen/kenmerken), keypad (functietoetsen 30 keys, large numeric), interfaces, Bluetooth, WLAN (802.11ac), Micro SD-Slot, processor (Qualcomm Octa Core), Geheugen, RAM: 2 GB, Flash: 32 GB, OS/ emulatie, Android, toebehoren, incl.: Google Mobile Services, accu, 7000 mAh, hand riem, beschermingsgraad, IP68
Zebra DS8178-HC PowerCap, BT, 2D, SR, FIPS, kabel (USB), wit
Bluetooth scanner , gezondheidszorg, 2D , imager (Standard range), FIPS, protection class: IP42, incl.: kabel (USB, rechte, 2 m), cradle, kleur: wit
Elo 1991L rev. B, 48.3 cm (19”), IT
touch monitor (open-frame, 5:4), 48.3 cm (19”), IntelliTouch, 1280×1024 pixels, 14ms, contrast: 1000:1, VGA, display-poort, HDMI, touch interface: USB, RS232, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
Zebra Printhead Xi-ser. 12 dots/mm (300dpi)
Printhead-Kit (spare) for Zebra label printer 170Xi4, ZE500-6 (RH & LH), 12 dots/mm (300dpi)












