Havis vehicle charging station, 2x USB 2.0, 1x USB 3.0, 1x USB 3.0 fast charging, 1x Ethernet, 1x RS232, VESA: 75 x 75, Tri Pass-through, order separately: power supply, fits for: UX10

Getac Havis vehicle charging station, Tri Pass-through
€982,30 Excl.BTW
Price Summary
- €1.188,58
- €1.188,58
- €1.188,58
Havis vehicle charging station, 2x USB 2.0, 1x USB 3.0, 1x USB 3.0 fast charging, 1x Ethernet, 1x RS232, VESA: 75 x 75, Tri Pass-through, order separately: power supply, fits for: UX10
Gerelateerde producten
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit charging station, TC21/26
Charging station, desktop, fits for: Zebra TC21/TC26
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Onlangs bekeken
Evolis colour ribbon (monochrome), scratch-off
Evolis colour ribbon (monochrome), fits for: Zenius, Primacy, for up to 1000 cards, scratch-off
Bixolon XT3-40, 8 dots/mm (203 dpi), display, USB, USB Host, RS232, Ethernet
thermal transfer, resolution: 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 108 mm, roll diameter (max.): 203mm, ribbon core: 25,4mm, speed (max.): 203 mm/s, connection: USB, USB Host, RS232, Ethernet, RAM: 128 MB, Flash: 128 MB, keypad (qQ): incl.: LCD Display, incl.: cable (USB), power supply: (power supply unit, power cable), QSG
Printronix print head, 8 dots/mm (203 dpi)
Print head, 8 dots/mm (203 dpi), 4 inch, RFID (plastic), fits for: T6000e
Evolis kleurenlint (monochroom), gold
Evolis kleurenlint (monochroom), geschikt voor: Zenius, tot 1000 kaarten, kleur: gold
TSC Printhead, 8 Dots/mm (203dpi), TTP-286MT
Printhead, 8 Dots/mm (203dpi), for: TTP-286MT
Elo 1790L rev. B, 43.2 cm (17”), IT
touch monitor (open-frame, 5:4), 43.2 cm (17”), IntelliTouch, 1280×1024 pixels, 5ms, contrast: 800:1, VGA, display-poort, HDMI, touch interface: USB, RS232, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
Epson ERC 23, kleurenlint, zwart
Epson ERC 23, kleurenlint, geschikt voor: TM-267/II, TM-250, TM-270, TM-280, M260, kleur: zwart
TSC Printhead, 8 Dots/mm (203dpi), TE2X0
Printhead, 8 Dots/mm (203dpi), for: TE200, TE210
Epson, labelrol, synthetisch, 76x127mm
Epson, labelrol, synthetisch (polypropyleen), premium mat gecoat, afmetingen (WxH): 76x127mm, 220 Etiketten/ rollen
Printronix print head, 8 dots/mm (203dpi)
Print head, 8 dots/mm (203dpi), fits for: T6E2X4






