SnapBack, extension battery, 4-Cell, 2100mAh, 14.4V, fits for: T800

Getac SnapBack, extension battery
€156,75 Excl.BTW
Price Summary
- €189,67
- €189,67
- €189,67
SnapBack, extension battery, 4-Cell, 2100mAh, 14.4V, fits for: T800
Gerelateerde producten
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Onlangs bekeken
Datalogic connection cable, USB
Connection cable, USB, length: 1.2 m, straight, power supply connector
Metapace interface, parallel
Plugin-interface, parallel, fits for: Metapace T-3II, please order separately: interface cable
Metapace K-2, wit
kassalade, opening voorzijde, afmetingen (BxHxD): 330x101x330mm, invoeren: 4 biljet compartimenten (horizontaal), 8 munt compartimenten, 1 cheque compartiment, 3-pos. Slot, directe printeraansluiting, RJ12, kleur: wit
Zebra ZB200
Bridge for automatic upload of data from ZS300 sensors, Bluetooth, Wi-Fi (802.11ac), Ethernet, IP50
TSC PEX-2260L
PEX-2260L, LEFT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Datalogic rubber boot
Rubber boot, fits for: Skorpio X5
PROTECH Case, EDA52, EDA56, EDA57
PROTECH Case for Honeywell EDA57- EDA56 – EDA52 – Softbag
Evolis Clear Patch
Clear patch, 0.5 mil, for up tp 600 prints, fits for: Avansia Lamination
Datalogic shoulder strap, 5 pcs.
Shoulder strap, 5 pcs., fits for: Falcon X3+
TSC Cutter Modul
Cutter module, full/partial cut, color: beige, fits for: TSC TTP-225
Elo Table Top / Pole Stand, short
Stand, short, height: 12.9 cm, fits for: Elo 10I1, 1002L, 0702L, 1002L, 1502L
Datalogic connection cable, IBM
Connection cable, IBM, USB (12 V powered USB), POT, 3 PIN, 4.6 m










