portable data collection device, 2D, imager (EA30), keypad (numeric), touch screen, Cam (5MP, auto-focus), 8.9 cm (3.5”), USB, Bluetooth, Wi-Fi (802.11a/b/g/n), Micro SD-Slot (max. 32GB), 480×640 pixels, type, TI OMAP 4470, 1.5GHz, RAM: 2 GB, Flash: 16GB, Android (6.0), IP67, incl.: battery, 4000mAh, order separately: interface cable, power supply unit
Honeywell CN75, 2D, EA30, USB, BT, Wi-Fi, num., Android
€1.750,88 Excl.BTW
Price Summary
- €2.118,57
- €2.118,57
- €2.118,57
portable data collection device, 2D, imager (EA30), keypad (numeric), touch screen, Cam (5MP, auto-focus), 8.9 cm (3.5”), USB, Bluetooth, Wi-Fi (802.11a/b/g/n), Micro SD-Slot (max. 32GB), 480×640 pixels, type, TI OMAP 4470, 1.5GHz, RAM: 2 GB, Flash: 16GB, Android (6.0), IP67, incl.: battery, 4000mAh, order separately: interface cable, power supply unit
Gerelateerde producten
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station, TC21/26
Charging station, desktop, fits for: Zebra TC21/TC26
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Onlangs bekeken
KOAMTAC uniVERSE Adaptor module
5pin OTG uniVERSE Adaptor module, fits for: KDC470
Datalogic PM9501, 2D, HD, DPM, multi-IF, kabel (USB), RB
draadloze scanner, industrie, 2D , imager (high density ), DPM, Green Spot, 3GL, multi interface (RS232, KBW, USB, RS485), draadloos, 433 MHz, IP65, incl.: kabel (USB), voeding, netsnoer (EU), cradle, verwijderbare batterij
Magnet stripe kaart, programmed
Pre-programmed magneet strip kaarten met a 5-digit nummer op spoor 2, kleur wit
Zebra S-400
Electronic temperature sensor, Bluetooth, range -30°C to +70°C, IP30, battery not replaceable
Zebra spare battery
Spare battery, 3150 mAh, PowerPrecision+, fits for: DS3678, LI3678
Zebra spare battery, extended
Spare battery, extended, 5200 mAh, PowerPrecision, fits for: MC3200, MC3300
APG base
Base for cash cassette, MUL interface, RJ45 socket with 8 pins, 12/24 V, order separately: connection cable (MUL), fits for: E3982
Elo Table Top / Pole Stand, short
Stand, short, height: 12.9 cm, fits for: Elo 10I1, 1002L, 0702L, 1002L, 1502L
Getac stylus, digitizer
Stylus, digitizer, fits for: F110, V110 G4/G5
Zebra lanyard adapter
Lanyard adapter, trigger for use with retraktor, fits for: RS5100
ProGlove connection cable, RS-232
Connection cable, RS-232, order separately: power supply, fits for: Access Point
Diebold Nixdorf stand, enhanced
Stand, enhanced, incl.: I/O hub, connection cable (USB-C), cable cover, fits for: BEETLE A1x50 (Cofee lake and Whiskey Lake)










