Extended armband, incl.: wrist pad, fits for: CT40 wearable kit

Honeywell extended armband
€81,47 Excl.BTW
Price Summary
- €98,58
- €98,58
- €98,58
Extended armband, incl.: wrist pad, fits for: CT40 wearable kit
Gerelateerde producten
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Onlangs bekeken
Datalogic PM9501-DK, 2D, AR, multi-IF, disp., RB
cordless scanner, industry, 2D, imager (Auto Range), keypad (16 keys), Green Spot, 3GL, display, multi-interface (RS232, KBW, USB, RS485), cordless, 433 MHz, IP65, incl.: desk-/wall holder, holster, removable battery, order separately: interface cable, charging/transmitter cradle
Honeywell stand, 8 cm
Stand, rigid, oval rod, weighted, height: 8 cm, colour: gray, fits for: 1900g, 195X
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
KOAMTAC pistol grip
Pistol grip, fits for: KDC470
Bixolon ribbon, black/red
Bixolon ribbon, colour: black/red, fits for: SRP-275III
Labelmate CAT-3-10-INCHES
Labelmate CAT-3-10-INCHES, Industry Standard Heavy-duty label rewinder, core holder: 76 mm, max. roll diameter: 300 mm, max. roll width: 255 mm, speed: 125 cm/sec.
Evolis colour ribbon (monochrome), silver
Evolis colour ribbon (monochrome), fits for: Zenius, Primacy, Elypso, for up to 1000 cards, colour: silver
Zebra EC50, 8-Pin, 2D, SE4100, USB-C, BT, Wi-Fi, NFC, Android
portable data collection device, 2D, imager (SE4100), Cam (13MP), front camera (5MP), brightness: 450cd, 12.7 cm (5”), USB-C, Bluetooth, Wi-Fi (802.11ac), NFC, Micro SD-Slot, resolution: 1280×720 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 64 GB, Android (10), protection class: IP67, incl.: battery, 3060mAh
Getac Havis vehicle holder
Havis vehicle holder, VESA: 75 x 75, fits for: UX10
ANKER MDX32, antraciet
cash drawer, front opening, 330x130x420mm, 6 note compartments, 8 coin compartments, removable, 2 receipt compartments, 1 receipt slot, 3-pos. lock, same locking, RJ11, RJ12, 24V, order separately: interface cable, colour: anthracite







