Spare battery, 7000 mAh, fits for: EDA61K

Honeywell spare battery
€96,74 Excl.BTW
Price Summary
- €117,06
- €117,06
- €117,06
Spare battery, 7000 mAh, fits for: EDA61K
Gerelateerde producten
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Onlangs bekeken
Honeywell Vehicle Cradle
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Datalogic battery charging station, 4 slots
Battery charging station, 4 slots, order separately: power supply, power cord, fits for: Memor 20
TSC cutter
Cutter only fits for: TE210, TE310
Zebra LI2208, 1D, multi-IF, kabel (USB), zwart
handscanner, 1D, lineaire imager, 547 scans/s, multi interface (RS232, KBW, USB, IBM), IP42, incl.: kabel (USB), tafelmontage, kleur: zwart
KOAMTAC charging station, 5 slots
Battery charging station, 5 slots, incl.: power supply, power cord (EU), fits for: Samsung Galaxy Tab Active
Zebra CS60-HC, BT, 2D, FIPS, BT (5.0), kabel (USB), wit
Bluetooth scanner, gezondheidszorg, 2D, imager, Diversen (eigenschappen/kenmerken), desinfecteerbare behuizing, FIPS, interfaces, Bluetooth (klasse 5.0), toebehoren, incl.: kabel (USB), cradle, accu, beschermingsgraad, IP65, kleur: kleur: wit
KOAMTAC power supply, UK
KOAMTAC power supply, incl.: power cord (UK), fits for: 5 slot charging station
iiyama ProLite B19, 48.3 cm (19”), kabel, wit
TFT monitor, 5:4, schermgrootte, 48.3 cm (19”), resolutie: 1280×1024 pixels, VESA mount (100×100 mm), verstelbare standaard, responstijd: 5ms, helderheid: 250cd, kijkhoek: 178/178°(H/V), contrast: 1000:1, aansluiting: DVI, VGA, incl.: kabel (DVI), voeding, netsnoer, QSG, kleur: wit
Epson inktpatronen, rood
Epson inktpatronen, geschikt voor: Epson TM-J 7100/7600, kleur: rood




