Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10

Honeywell Vehicle Cradle
€588,01 Excl.BTW
Price Summary
- €711,49
- €711,49
- €711,49
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Gerelateerde producten
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
Honeywell extended armband
Extended armband, incl.: wrist pad, fits for: CT40 wearable kit
Star mC-Print2, USB, USB Host, BT, Ethernet, 8 dots/mm (203 dpi), cutter, wit
bonprinter , uitgang voorzijde, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 58mm, printbreedte (max.): 50.8mm, diameter rol (max.): 50mm, 100 mm/sec., USB, USB Host (2x), Bluetooth, Ethernet, kassa aansluiting, afsnijdmechanisme, emulatie, Star, incl.: voeding, netsnoer (EU, UK), bonrol, QSG, wit
Diebold Nixdorf BA92, 30,7cm (12,1”), Projected Capacitive, zwart
4:3, Klantendisplay, 30,7cm (12,1”), Touch screen , Projected Capacitive, resolutie: 800×600 pixels, helderheid: 400cd, contrast: 800:1, aansluiting: USB (Type A, type B), DVI, VGA, apart bestellen, interface kabel, voeding, netsnoer, stand, kleur: zwart
M3 Mobile charging station, 4 slots
Charging station, 4x device, 4x spare battery, order separately: power supply, power cord, fits for: UL20
iiyama ProLite LH5070UHB-B1, 4K
TFT screen, 16:9, 126 cm (50”), resolution: 3840×2160 pixels, VESA mount, 8ms, brightness: 700cd, viewing angle: 178/178°(H/V), contrast: 4000:1, USB (2x, Host), audio, HDMI, incl.: cable (USB, HDMI), power supply unit, power cable
Datalogic GM4500, 2D, kabel (USB), zwart
draadloze scanner, 2D , imager, Green Spot, 3GL, draadloos, 433 MHz, IP52, incl.: kabel (USB, rechte, 2 m, zwart), cradle, accu, 3250mAh, kleur: zwart
Datalogic QuickScan Mobile QM2430, 2D, multi-IF, zwart
draadloze scanner, retail, 2D , imager, multi interface (RS232, KBW, USB), IP42, incl.: cradle, accu, apart bestellen, interface kabel, voeding, kleur: zwart
M3 Mobile Holster
Holster, incl.: shoulder strap, fits for: SL10, SL10K, SM15
Honeywell hand strap, rotating, pack of 3
Hand strap, rotating, pack of 3, fits for: EDA70, EDA71





