Power supply, incl.: plug (UK), fits for: 1 slot charging-/communication station

M3 Mobile power supply, UK
€24,45 Excl.BTW
Price Summary
- €29,58
- €29,58
- €29,58
Power supply, incl.: plug (UK), fits for: 1 slot charging-/communication station
Gerelateerde producten
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Onlangs bekeken
TSC Printhead, 8 Dots/mm (203dpi), MH241
Printhead, 8 Dots/mm (203dpi), for: MH241T, MH241P
TSC Alpha-4L, USB, WLAN, 8 dots/mm (203 dpi), disp., CPCL, TSPL-EZ
mobiele printer, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 112 mm, printbreedte (max.): 104mm, diameter rol (max.): 67,3 mm, snelheid(max): 102 mm/sec., USB, WLAN, Micro SD-Slot, display, Black Mark Sensor, Gap Sensor, emulatie, CPCL, TSPL-EZ, RAM: 32 MB, Flash: 16 MB, incl.: kabel (USB), voeding, accu, 5800mAh
Mobilis screen protector, IK06, matte, Anti-Shock IK06, Clear, 5H
Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: TC51/TC56
kassalade binnenbak K-1
binnenbak tbv K-1 kassalade. In iedere lade is een stuks van deze binnenbakken bijgeleverd
Elo 1991L rev. B, 48.3 cm (19”), IT
touch monitor (open-frame, 5:4), 48.3 cm (19”), IntelliTouch, 1280×1024 pixels, 14ms, contrast: 1000:1, VGA, display-poort, HDMI, touch interface: USB, RS232, incl.: kabel (USB, VGA, HDMI), apart bestellen, voeding
APG E3000, kabel, zwart
cash drawer, front opening, 446x109x410mm, 5 note compartments, 8 coin compartments, 2 receipt slots, underdesk mountable, 3-pos. lock, different locking, 24V, incl.: cable (RJ11), colour: black
Metapace MP-78, BT, 2D, multi-IF, kabel (USB), zwart
Bluetooth scanner , retail, 2D , imager, multi interface (RS232, KBW, USB), IP42, incl.: kabel (USB, rechte, 2 m, zwart), cradle, kleur: zwart
Epson, labelrol, synthetisch, 76x51mm
Epson, labelrol, synthetisch (polypropyleen), premium mat gecoat, afmetingen (WxH): 76x51mm, 535 Etiketten/ rollen
M3 Mobile power supply, UK
Power supply, incl.: plug (UK), fits for: 1 slot charging-/communication station
Zebra Upgrade Kit, Cutter
Upgrade Kit, Cutter, fits for: ZT510





