Protective case, incl.: kick stand, hand strap (rotating), fits for: ET40/45 (8”)
Mobilis Activ+ Protective Case
€81,87 Excl.BTW
Price Summary
- €99,06
- €99,06
- €99,06
Protective case, incl.: kick stand, hand strap (rotating), fits for: ET40/45 (8”)
Gerelateerde producten
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Onlangs bekeken
TSC PEX-2260L
PEX-2260L, LEFT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Zebra cutter, kit
Cutter, guillotine, incl.: catch tray, fits for: ZT420
Anker UCD, freewheeling diode, slowed version, antraciet
kassalade, opening voorzijde, afmetingen (BxHxD): 385x95x435mm, invoeren: 4 biljet compartimenten, 8 munt compartimenten, 1 cheque compartiment, directe printeraansluiting, DIN, 24V, kabel lengte 3m, kleur: antraciet
Evolis Netzteil
Power supply, 24V, 3A, for Tattoo2, Tattoo RW, Zenius, Primacy, Pebble4, Dualys3, order separately: power cord
Getac hand strap
Hand strap, kick stand, rotating, fits for: ZX70
Zebra LI4278, BT, 1D, multi-IF, kabel (USB), wit
Bluetooth scanner , 1D, lineaire imager, 547 scans/s, multi interface (RS232, KBW, USB), incl.: kabel (USB), cradle, accu, kleur: wit
M3 Mobile Snap-on
Snap-on, RFID (UHF), fits for: SM15
Datalogic PM9600-SR, White LED reading light, 2D, RB
cordless scanner, industry, 2D, imager, cordless, 433 MHz, IP65, IP67, incl.: battery, 3300mAh, removable battery
Datalogic PM9600-HP, High Performance, 2D, RB
cordless scanner, industry, 2D, imager, cordless, 433 MHz, IP65, IP67, incl.: battery, 3300mAh, removable battery
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Preh Blind Key, wit
Preh 1×5 blind keycap in wit. Deze keycaps worden gebruikt om toetsen af te dekken die niet worden gebruikt.
M3 Mobile extension
Extension, length: 12 cm, fits for: vehicle mount










