Protective Boot, soft bag, fits for: TC22, TC27

Mobilis Protective Boot
€18,02 Excl.BTW
Price Summary
- €21,81
- €21,81
- €21,81
Protective Boot, soft bag, fits for: TC22, TC27
Gerelateerde producten
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Onlangs bekeken
Mobilis Protech case, TC53/58
HHD case, incl.: handstrap, color: black, fits for: TC53/58
Parallel UB-P02II
Reeds bijgeleverd in alle Epson parallel printers.Gelieve uitsluitend bestellen indien je een interface wilt wijzigen in een reeds in gebruikstaande printer.
Elo handles
Handles, set (2 pcs.), fits for: 02-Series, 03-Series
Elo stand
Stand, VESA: 75, incl.: I/O Hub (2x USB-A 2.0, 2x USB-A 3.0, 1x powered-USB 24V, 2x powered-USB 12V, 1x USB-C, 1x cash drawer connector, 2x RS232 (RJ45)), power suuply, power cord (EU, US), connection cable (RS232), fits for: I series 2.o Windows
Mobilis screen protector, EDA50
Screen protector, EDA50, Anti-Shock, fits for: EDA50
Powered USB kabel 3 m
zwart, tbv Epson Powered USB interface (see Epson interfaces)
KOAMTAC protective case
Protective case, fits for: Samsung Galaxy Tab Active2
TSC printhead
Printhead, 12 dots/mm (300 dpi), fits for: TTP-346MT
Datalogic Connection Cable USB-A
Connection Cable USB-A, straight, 3.6m, IP67
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Getac main battery
Main battery, 4200 mAh, 6 cell, 11,1V, fits for: S410
biljethouder
Biljethouder Unit: biljethouder, houder support, Spring
Anker note holder
Note holder, plastic, adhesive, for Anker cash drawer, color: anthracite
KOAMTAC hand strap (R)
Hand strap, right hand, size: M, fits for: KDC180







