Protective case, incl.: kickstand, handstrap, shoulder strap, fits for: ET51/56 (10.1”)
Mobilis protective case
€39,86 Excl.BTW
Price Summary
- €48,23
- €48,23
- €48,23
Protective case, incl.: kickstand, handstrap, shoulder strap, fits for: ET51/56 (10.1”)
Gerelateerde producten
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station, TC21/26
Charging station, desktop, fits for: Zebra TC21/TC26
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Onlangs bekeken
Zebra Printhead Xi-ser. 8 dots/mm (203dpi)
Printhead-Kit (spare) for Zebra label printer 170Xi4, ZE500 (6”), 8 dots/mm (203dpi)
Evolis colour ribbon (monochrome), scratch-off
Evolis colour ribbon (monochrome), fits for: Zenius, Primacy, for up to 1000 cards, scratch-off
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Zebra ZXP 3 inktlint: YMCKOK
Zebra inktlint YMCKOK met overcoat, tbv 165 kunstof kaarten, tbv Zebra ZXP 3
Epson, labelrol, synthetisch, 76x51mm
Epson, labelrol, synthetisch (polypropyleen), premium mat gecoat, afmetingen (WxH): 76x51mm, 535 Etiketten/ rollen
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
TSC printhead, 24 Dots/mm (600dpi), TX600
Printhead, 24 Dots/mm (600dpi), for: TX600
Zebra power supply
Power supply, incl.: power cord (UK), charges battery inside printer, fits for: QLn420, QLn320, QLn220, ZQ500, ZQ600
TSC cutter
Guillotine cutter module, full cut, fits for: TX200 Series
Honeywell power supply, EU
power supply, incl.: power cord (EU, C13), fits for: Honeywell mobile printer range
Zebra Printhead ZE500, 8 dots/mm (203dpi)
Printhead-Kit (spare) for Zebra label printer ZE500-4 RH & LH, 8 dots/mm (203dpi)
Evolis plastic card, 100 pcs., red
Plastic card, PVC, 30 mil, red, 100 cards
Elo 0702L, 17.8cm (7”), Projected Capacitive, 10 TP
touch monitor (aspect ratio: 5:3), 17.8cm (7”), Touchscreen, Projected Capacitive, multi touch (10 points), 800×480 pixels, VESA mount (75×75 mm), 25ms, brightness: 430cd, viewing angle: 150/120°(H/V), contrast: 800:1, USB (micro-USB), touch interface: USB, IP54, incl.: cable (USB, Micro ), QSG
Zebra belt clip, pack of 5
Belt clip, pack of 5, fits for: ZQ510, ZQ520
Binnenbak tbv standaard en MINI
8 verwijderbare Conversie/4 bankbiljetten vakken, 1 Cheque vak, geschikt voor STD2000-0268/0197, MINI-0230/0231










