Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1”)
Mobilis screen protector, IK06, ET5X (10.1”)
€14,71 Excl.BTW
Price Summary
- €17,80
- €17,80
- €17,80
Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1”)
Gerelateerde producten
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Onlangs bekeken
Bixolon SPP-L410, USB, RS232, BT (BLE), 8 dots/mm (203 dpi), ZPLII, CPCL
label printer, mobile printer, direct thermal, resolution: 8 dots/mm (203 dpi), media width (max.): 112 mm, print width (max.): 104 mm, roll diameter (max.): 56 mm, speed (max.): 102 mm/s, USB, RS232, Bluetooth (BLE), Black Mark Sensor, Gap Sensor, emulation: ZPLII, SLCS, CPCL, RAM: 128 MB, Flash: 256 MB, incl.: power supply unit, power cable, belt clip, battery, 2850mAh
Mobilis Smartphone Vehicle Mount
Magnetic Vehicle Mount, air vent, incl.: 2x metal plates, fits for: Smartphones
Datalogic connection cable, RS-232, Beetle
Datalogic connection cable, RS-232 (9P, male), Beetle, length: 2 m, straight, power over terminal
Zebra belt clip, pack of 5
Belt clip, pack of 5, fits for: ZQ510, ZQ520
Evolis ribbon, YMCKI
Evolis ribbon, YMCKI RT for cards with magnetic stripe or/and chip, 400 prints per roll
Diebold Nixdorf connection cable
Connection cable, Powered-USB to Hosiden (female)
Elo Floor Stand
floor stand, height: 100 cm, fits for: 1002L, 1502L, 2002L, 10I1, 15I1, 22I1, 1302L
Datalogic charging-/communication station
Charging-/communication station, 433 MHz, Multi-Interface (USB/RS-232/Wedge), color: black, fits for: GM4200
Datalogic connection cable, USB
Connection cable, USB, length: 1.2 m, straight, power supply connector
Elo 1715L, 43.2 cm (17”), AT, donkergrijs
touch monitor (5:4), 43.2 cm (17”), AccuTouch, 1280×1024 pixels, VESA mount, 25ms, helderheid: 230cd, kijkhoek: 140/123°(H/V), contrast: 800:1, VGA, touch interface: USB, RS232, netsnoer (EU), kleur: donkergrijs
Datalogic RIDA DBT6420, BT, 2D, USB, kabel (USB), zwart
Bluetooth scanner , 2D , imager, USB, IP50, incl.: kabel (USB), cradle, batterij, kleur: zwart
Honeywell DC power cable, Dock to Fuse Block
DC power cable, Dock to Fuse Block, Input: 12-30 V DC, order separately: Fuse Blog Power Kit (203-803-001)
Mobilis protective case
Protective case, incl.: kickstand, handstrap, shoulder strap, fits for: ET51/56 (10.1”)
Zebra charging/transmitter cradle, ethernet,
Charging/transmitter cradle, ethernet, incl.: power supply, power cord (UK), fits for: QLn420, ZQ630








