Shoulder strap, 4-Point
Mobilis shoulder strap
€16,50 Excl.BTW
Price Summary
- €19,97
- €19,97
- €19,97
Shoulder strap, 4-Point
Gerelateerde producten
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Onlangs bekeken
iiyama ProLite XUB22/XB22/B22, 54.6cm (21.5”), Full HD, kabel, zwart
TFT monitor, 16:9, 54.6cm (21.5”), resolutie: 1920×1080 pixels, VESA mount (100×100 mm), luidspreker, responstijd: 3ms, helderheid: 250cd, kijkhoek: 178/178°(H/V), 1000:1, audio, display-poort, HDMI, incl.: kabel (HDMI), netsnoer, QSG, zwart
Zebra cleaning kit
Cleaning kit, contains 4 print engine cleaning cards and 4 feeder cleaning cards(1000 prints/card) fits for Zebra ZXP Series 1
Datalogic holder
Holder, fits for: Taskbook (7”, 10”)
Elo 2403LM, Projected Capacitive, 10 TP, Full HD, white
TFT screen, 16:9, 60.5 cm (23,8”), Projected Capacitive, multi touch (10 points), resolution: 1920×1080 pixels, VESA mount (100×100 mm), 16ms, brightness: 225cd, viewing angle: 178/178°(H/V), contrast: 1000:1, USB (Host), audio, VGA, HDMI, touch interface: USB, protection class: IP54, incl.: cable (USB, VGA, Audio, HDMI), power supply unit, power cable (EU, US), stand, colour: white
TSC PEX-2260R
PEX-2260R, RIGHT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Datalogic Voeding EU
Power supply, EU/USA-compatible, connection to the Memor/Formula directly or through the cradle
Printronix T820, 8 dots/mm (203 dpi), USB, RS232, Ethernet
label printer, thermal transfer, resolution: 8 dots/mm (203 dpi), media width (max.): 112 mm, print width (max.): 104 mm, roll diameter (max.): 127mm, speed (max.): 203 mm/s, USB (type A, type B), RS232, Ethernet, Black Mark Sensor, Gap Sensor, incl.: power supply unit, power cable (EU)
Elo handles
Handles, set (2 pcs.), fits for: 02-Series, 03-Series
Mobilis shoulder strap
Shoulder strap, 4-Point







