Vehicle adapter, USB-C, input: 12-24 VDC, output: 5 V 2.4A, order separately: connection cable (USB-C/USB-C)
Mobilis vehicle adapter, USB-C
€9,63 Excl.BTW
Price Summary
- €11,65
- €11,65
- €11,65
Vehicle adapter, USB-C, input: 12-24 VDC, output: 5 V 2.4A, order separately: connection cable (USB-C/USB-C)
Gerelateerde producten
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Onlangs bekeken
Zebra Plastic kaart, 500stuks.
Plastic kaart met magneet kaartlezer, LOCO, 0.76 mm, size: 30 mil, 500 stuks., kleur: wit
Zebra battery charging station, 4 slots
Battery charging station, 4 slots, inductive charging, colour: black, incl.: power supply, DC cable, order separately: power cord, fits for: CS6080
Printronix T82X8, 8 dots/mm (203 dpi), USB, RS232, Ethernet
label printer , thermal transfer, resolutie: 8 dots/mm (203 dpi), mediabreedte (max): 222 mm, printbreedte (max.): 216 mm, diameter rol (max.): 203mm, snelheid(max): 254 mm/sec., USB (2.0), RS232, Ethernet, RAM: 512 MB, Flash: 128 MB, Black Mark Sensor, Gap Sensor, incl.: voeding (intern), netsnoer (EU)
Zebra ZXP 7 reinigings kit
Zebra ZXP Series 7 Print Station reinigings Kit (bevat 12 feeder en print path reinigings kaarten for60,000 prints)




