Battery, extended, 5200 mAh, PowerPrecision+, 10 pieces, fits for: MC3300
Zebra battery, extended, 10 pcs.
€568,12 Excl.BTW
Price Summary
- €687,43
- €687,43
- €687,43
Battery, extended, 5200 mAh, PowerPrecision+, 10 pieces, fits for: MC3300
Gerelateerde producten
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
Identiv SCR3340
smart card lezer (ISO 7816), ExpressCard 54
Labelmate CAT-3-CHUCK
Labelmate CAT-3-STANDARD, Industry Standard Heavy-duty label rewinder, core holder: 76 mm, max. roll diameter: 300 mm, max. roll width: 170 mm, speed: 125 cm/sec., incl.: Quick-Chuck
Datalogic QuickScan Mobile QBT2430, BT, 2D, multi-IF, kabel (USB), zwart
Bluetooth scanner, retail, 2D, imager, multi-interface (RS232, KBW, USB), IP42, incl.: cable (USB, Micro ), battery, colour: black
Zebra Workstation Connect
Workstation Connect Cradle, HDMI, Ethernet, 4x USB, 3,5mm Headset Jack, compatible with and without rugged boot, not compatible with Expansion Back, order separately: Power Supply, Power Cord, fits for: ET4X
Zebra connection cable, USB
Connection cable, USB, shielded, length: 2.1 m, straight
Labelmate UNI-CAT-ACH
Labelmate CAT-3-STANDARD, Industry Standard Heavy-duty label rewinder, core holder: 25 to 101 mm, max. roll diameter: 280 mm, max. roll width: 155 mm, speed: 125 cm/sec.
TSC spare battery
Spare battery, 3030 mAh, fits for: Alpha-30L
Magnet stripe kaart, programmed
Pre-programmed magneet strip kaarten met a 5-digit nummer op spoor 2, kleur wit





