Battery, extended, 5200 mAh, PowerPrecision+, fits for: MC3300

Zebra battery, extended
€86,83 Excl.BTW
Price Summary
- €105,07
- €105,07
- €105,07
Battery, extended, 5200 mAh, PowerPrecision+, fits for: MC3300
Gerelateerde producten
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Onlangs bekeken
POSPOLE base pole
Base pole, diamter: 45 mm, default cutout, height: 400 mm, incl.: top cover, bottom cover, 4x M6 50mm screw, 4x 6,4 steel washer, 4x M6 bolt nut, 4x C4.8×16 screw, 1x hex screwdriver, colour: black
Datalogic connection cable, RS232
Connection cable, RS232 (9 PIN, female), coiled, length: 2.4 m
Printronix interface card GPIO
Interface card GPIO, fits for: T8000 series, T6000e series
Getac hand strap
Hand strap, rotating, incl.: stand, fits for: F110G5
Citizen CL-S700II, 8 dots/mm (203 dpi), MS, EPL, ZPLII, Datamax, multi-IF (Ethernet)
label printer , thermal transfer, resolutie: 8 dots/mm (203 dpi), mediabreedte (max): 118 mm, printbreedte (max.): 104mm, snelheid(max): 254 mm/sec., multi interface (RS232, USB, Ethernet), EPL, ZPLII, Datamax, beweegbare sensor
Zebra ET40, 2D, SE4100, 20.3 cm (8”), USB-C, BT, NFC, Android, GMS
Tablet PC, 2D, imager (SE4100), schermgrootte, 20.3 cm (8”), Touch screen, 1280×800 pixels, Camera (13MP), front camera (5MP), helderheid: helderheid: 500cd, aansluiting: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2GHz, RAM: 8 GB, Flash: 128 GB, Android (11), incl.: Google Mobile Services, accu, 6150mAh, IP65
Citizen CT-E651, 8 dots/mm (203 dpi), cutter, USB, USB Host, Lightning, black
label printer, direct thermal, 8 dots/mm (203 dpi), media width (max.): 80 mm, print width (max.): 72 mm, roll diameter (max.): 83mm, speed (max.): 300 mm/s, USB, USB Host, Lightning, RJ12, ESC/POS, Flash: 8 MB, cutter, incl.: power supply unit, power cable (EU), colour: black
Zebra battery, extended
Battery, extended, 5200 mAh, PowerPrecision+, fits for: MC3300
Getac holder, passive
Holder, passive, key locking, fits for: Z710, ZX70
Zebra cutter, kit
Cutter, kit, fits for: ZD421c







