Charging-/communication snap-on, interface: USB-C, length: 15 cm, order separately: connection cable (USB-C), fits for: WS50

Zebra charging-/communication snap-on
€71,02 Excl.BTW
Price Summary
- €85,94
- €85,94
- €85,94
Charging-/communication snap-on, interface: USB-C, length: 15 cm, order separately: connection cable (USB-C), fits for: WS50
Gerelateerde producten
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Onlangs bekeken
Bixolon power supply, USB
Power supply, USB, to charge the printer directly, fits for: SPP-R210, SPP-R200III, SPP-R310, SPP-R410, SPP-L310, L410
Star MCW10 WLAN-Modul
WLAN-Modul, fits for: TSP100 IV, MCP3-Series
Zebra MC18 Cradle Housing Tool
Used to remove 3-Slot Cradle Cover where hand space is limited, for PS20 / MC18
Elo stand kit, Floor Base, Double-Sided
Stand, Floor Base, Double-Sided, fits for: Wallaby Pro
Getac SnapBack, extension battery
SnapBack, extension battery, 4-Cell, 2100mAh, 14.4V, fits for: T800
Diebold Nixdorf interface card, Wi-Fi, Bluetooth
Interface card, Wi-Fi (802.11ac), Bluetooth (5.1)
M3 Mobile power supply
Power supply, 12 VDC, 7 A, incl: power cord(EU), fits for: 4 slots charging/transmitter station
Zebra TC8300, 2D, MR, BT, Wi-Fi, Android
portable data collection device, 2D, imager (medium range), brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Zebra Peeler, kit
Peeler, fits for: ZT220, ZT230
Ratiotec RP 50
Counterfeit detector pen, checks the chemical composition of banknotes, for nearly all currencies, 135x12mm





