Clamp base, for 4” or 12” RAM arm, 3” max. width
“Brodit charging station, table” is toegevoegd aan je winkelwagen. Bekijk winkelwagen
Zebra clamp base
Vorig product
Zebra spare battery, extended
€144,77 Excl.BTW
Volgend product
Zebra Vesa plate
€113,88 Excl.BTW
€66,64 Excl.BTW
Sluiten
Price Summary
- €80,63
- €80,63
- €80,63
0 Out of Stock
Belangrijkste punten:
Vergelijk
Clamp base, for 4” or 12” RAM arm, 3” max. width
Gerelateerde producten
Brodit charging station (MOLEX),MC55, MC65, MC67
Belangrijkste punten:
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
€95,49 Excl.BTW
Brodit mount, MMC, PM, QLn320
Belangrijkste punten:
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
€154,45 Excl.BTW
Brodit pedestal mountr, 5.0
Belangrijkste punten:
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
€45,02 Excl.BTW
Brodit holder, TS, TC5X
Belangrijkste punten:
Holder, tilt swivel, fits for: TC5X (with protective case)
€32,74 Excl.BTW
Brodit holder, with lock, ET5X (8”) (protective case)
Belangrijkste punten:
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
€438,60 Excl.BTW
Brodit vehicle holder
Belangrijkste punten:
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
€130,35 Excl.BTW
Brodit charging cradle, USB, ET5X (10”)
Belangrijkste punten:
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
€410,93 Excl.BTW
Brodit charging station (MOLEX), locking, MC3300
Belangrijkste punten:
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
€245,33 Excl.BTW
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Belangrijkste punten:
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
€92,66 Excl.BTW
Brodit holder, with lock, TC8000
Belangrijkste punten:
Holder, with closure, fits for: TC8000
€145,16 Excl.BTW
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Belangrijkste punten:
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
€163,23 Excl.BTW
Brodit voltage converter
Belangrijkste punten:
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
€148,17 Excl.BTW
Onlangs bekeken
Zebra connection cable, RS-232
Belangrijkste punten:
Connection cable, amphenol threaded circular connector, 9ft (2.8m), coiled with ttl current limit protection, fits for: VC5090
€89,25 Excl.BTW
Datalogic voeding, USB
Belangrijkste punten:
Power supply, Micro USB, charge direct to device
€24,06 Excl.BTW
Printronix interface card GPIO
Belangrijkste punten:
Interface card GPIO, fits for: T8000 series, T6000e series
€415,17 Excl.BTW
Plastic cards, 50
Belangrijkste punten:
White plastic cards without magnetic stripe, box of 50
Datalogic rubber boot
Belangrijkste punten:
Rubber boot, order optionally: handstrap, fits for: Memor X3
€18,62 Excl.BTW
Datalogic GM4500, 2D, wit
Belangrijkste punten:
draadloze scanner, 2D , imager, Green Spot, 3GL, draadloos, 433 MHz, IP52, incl.: accu, 3250mAh, apart bestellen, cradle, kleur: wit
€323,85 Excl.BTW
Zebra adapter, EC50/EC55
Belangrijkste punten:
Adapter, allows EC50/55 to be mounted on top of RFD40, fits for: RFD40
€64,16 Excl.BTW
Elo power supply
Belangrijkste punten:
Power supply, incl.: power cord (EU, US), fits for: I-Series
€79,42 Excl.BTW
Diebold Nixdorf barcode scanner
Belangrijkste punten:
Barcode scanner, BA9x, 2D, black, to be mounted on the right or left side
€399,91 Excl.BTW
Bixolon cutter
Belangrijkste punten:
Auto-Cutter, fits for: DX220
€109,66 Excl.BTW
M3 Mobile Snap-on
Belangrijkste punten:
Snap-on, RFID (UHF), fits for: SM15
€536,73 Excl.BTW
8675i Lanyard Conversion Kit
Belangrijkste punten:
Kit to convert glove or triggered ring to lanyard version with trigger, 5 peaces, fits for: 8675i (glove or ring option)
€565,18 Excl.BTW
