Tablet PC, 21.3cm (8.4”), capacitive, multi touch, GPS, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, 2560×1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, 6150mAh, protective case

Zebra ET56 Kit 4, USB, BT, WLAN, 4G, NFC, GPS, Android, kabel (USB)
€1.579,38 Excl.BTW
Price Summary
- €1.911,05
- €1.911,05
- €1.911,05
Tablet PC, 21.3cm (8.4”), capacitive, multi touch, GPS, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, 2560×1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, 6150mAh, protective case
Gerelateerde producten
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit wingnut
Wingnut, for Pedestal Mount
Onlangs bekeken
Zebra reinigings kaart
Reinigings kaart-Set Premium (25 standaard- + 25 Print, Engine reinigings kaarten) tbv Zebra P330i en P430i
Honeywell 1990i, 2D, XLR, multi-IF, USB
handheld scanner, 2D, imager (extre long range), vibration, multi-interface (RS232, KBW, USB), IP65, IP67, incl.: USB, type A
Evolis Plastic Cards, 100 pcs.
Plastic Cards, 20 mil, pre-punched(Hole size 5mm), 100 pcs. ,fits for: Zenius, Primacy, Elypso, Tattoo2, Pebble4, Dualys3
Zebra holster
Holster, fits for: MC22, MC27
Honeywell Vehicle Cradle
Vehicle cradle – power only. VM compatible 10-60V power supply, with key-lock. RT10 pogo-pin dock connector, 75x75mm VESA mount, vibration: MIL STD. 810G, 5 – 500Hz, 2.24G, for: RT10
Zebra Printhead Xi-ser. 8 dots/mm (203dpi)
Printhead-Kit (spare) for Zebra label printer 170Xi4, ZE500 (6”), 8 dots/mm (203dpi)
Citizen reinigings pen
Kop reinigings pen, tbv Citizen CL-S en CLP label printers, verpakking van 10
Diebold Nixdorf interface card, Wi-Fi, Bluetooth
Interface card, Wi-Fi (802.11ac), Bluetooth (5.1)
Zebra cleaning card, pack of 2
Cleaning card, pack of 2, improved, fits for: ZC100, ZC300
Zebra RS6100, Enterprise Hand Mount, BT, 2D, BT, ext. bat.
Bluetooth scanner, 2D, imager (SE5500), trigger, Bluetooth, incl.: battery, extended, 735mAh, order separately: charging cradle, Hand strap, operating: -30° up to +50°C
Zebra battery charging station, 4 slots
Battery charging station, 4 slots, inductive charging, colour: black, incl.: power supply, DC cable, order separately: power cord, fits for: CS6080
Epson ERC 05B, colour ribbon, black
Epson ERC 05B, colour ribbon, fits for: M-150, M-150II, colour: black
Zebra holster
Holster, fits for: MC3XXX (gun version)









