ET5x Rugged Frame with I/O connector, for 10” tablets, compatible with extended batteries and Handle/Shoulder Straps

Zebra ET5x Rugged Frame
€179,43 Excl.BTW
Price Summary
- €217,11
- €217,11
- €217,11
ET5x Rugged Frame with I/O connector, for 10” tablets, compatible with extended batteries and Handle/Shoulder Straps
Gerelateerde producten
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Onlangs bekeken
Zebra spare battery
Spare battery, 735 mAh, fits for: CS60
ratiotec rapidcount T 575
Counting machine, bank notes, un-sorted (Euro notes, USD notes, GBP notes, CHF notes), counting rate: up to 1.000 notes/Min., direct printer connection, authenticity check (UV, IR, MG-characteristics, CIS, metal thread, shape), incl.: power cable, manual, dimensions (WxHxD): 268x255x263mm
Zebra spare battery
Spare battery, 3150 mAh, PowerPrecision+, fits for: DS3678, LI3678
Zebra Intelligent Cabinet, Medium, Flat Packed Version
Intelligent Cabinet Medium, device capacity 40, 1312 x 700 x 437 mm (HxWxD), 3 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
TSC charging station, EU
Charging station, 1 slot, incl.: power supply (EU), fits for: Alpha-4L
Labelmate CAT-3-CHUCK
Labelmate CAT-3-STANDARD, Industry Standard Heavy-duty label rewinder, core holder: 76 mm, max. roll diameter: 300 mm, max. roll width: 170 mm, speed: 125 cm/sec., incl.: Quick-Chuck
Zebra RS6100, Single Trigger, BT, 2D, BT
Bluetooth scanner, 2D, imager (SE5500), trigger, Bluetooth, incl.: battery, 480mAh, order separately: charging cradle
TSC PEX-2360R
PEX-2360R, RIGHT HAND, 300dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
TSC PEX-2260R
PEX-2260R, RIGHT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
TSC Cutter Modul
Cutter module, full/partial cut, color: beige, fits for: TSC TTP-225
KOAMTAC hand strap
Hand strap, fits for: KDC470 (w/o pistol grip)
Metapace interface card, ethernet + RS-232
Interface card, ethernet + RS-232, fits for: T-40









