Zebra spare hand strap in M/L, fits for: WT6000
Zebra hand strap M/L
€72,36 Excl.BTW
Price Summary
- €87,56
- €87,56
- €87,56
Zebra spare hand strap in M/L, fits for: WT6000
Gerelateerde producten
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Onlangs bekeken
Identiv uTrust SmartFold SCR3500 A, USB, wit
smart card lezer (ISO 7816), USB, afmetingen (BxHxD): 20x12x48mm, kleur: wit
Citizen printkop
Printkop tbv Citizen CL-S300, 8 dots/mm (203dpi)
M3 Mobile holster
Holster, incl.: belt, fits fro: UL20
Star interface, RS-232 (25Pin)
Interface, RS-232 (25Pin), fits for: Star TSP600, TUP900, SP500, SP700
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Magnet stripe kaart, programmed
Pre-programmed magneet strip kaarten met a 5-digit nummer op spoor 2, kleur wit
Datalogic Powerscan PD9630, 2D, SR, multi-IF, kabel (RS232)
handscanner, 2D , imager (Standard range), trigger, vibratie/ trilling, multi interface (RS232, USB), IP65, IP67, incl.: kabel (RS232)
Zebra battery, extended
Battery, extended, 5200 mAh, PowerPrecision+, fits for: MC3300
Metapace stand
Stand, gooseneck, intellistand, black, fits for: MP28









