Hip-mount, fits for: WT6000
Zebra Hip-mount
€72,38 Excl.BTW
Price Summary
- €87,58
- €87,58
- €87,58
Hip-mount, fits for: WT6000
Gerelateerde producten
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
TSC PEX-2260R
PEX-2260R, RIGHT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Evolis inktlint
Inktlint, monochrome, geschikt voor: Zenius, Primacy, tot aan 1000 kaarten, kleur: wit
KOAMTAC protective case
Protective case, fits for: Samsung Galaxy Tab Active2
Labelmate MC-11+
Labelmate MC-11+, quality label rewinder, potentiometer, core holder: 25 to 101 mm, max. roll diameter: 220 mm, max. roll width: 115 mm, speed: 50 cm/sec.
Zebra connection cable, USB
Connection cable, USB, shielded, length: 2 m, straight, power supply connector
Getac hand strap
Hand strap, rotating, kickstand, fits for: F110G6
POSPOLE base pole
Base pole, diamter: 45 mm, default cutout, height: 400 mm, incl.: top cover, bottom cover, 4x M6 50mm screw, 4x 6,4 steel washer, 4x M6 bolt nut, 4x C4.8×16 screw, 1x hex screwdriver, colour: black
Datalogic holder
Holder, fits for: Taskbook (7”, 10”)
Zebra hand strap
Hand strap, fits for: pistol grip









