Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Zebra Intelligent Cabinet, Extreme, Flat Packed Version
€5.536,55 Excl.BTW
Price Summary
- €6.699,22
- €6.699,22
- €6.699,22
Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Gerelateerde producten
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Onlangs bekeken
ProGlove reel bundle, 2 pcs.
Reel Bundle, 2 pieces per package, extendable module holder, automatic release function when pulling out, length up to 70 cm, additional trigger on the back, tiltable clip, fits for: MARK 2, MARK Basic
Epson M-T522IIAP
Max Media Width: 60mm, 24V, Partial Auto Cutter
Datalogic GM4500, 2D, wit
draadloze scanner, 2D , imager, Green Spot, 3GL, draadloos, 433 MHz, IP52, incl.: accu, 3250mAh, apart bestellen, cradle, kleur: wit
Honeywell rubber boot
Protective Rubber Boot, fits for: CK65 with 6703 scan engine
Zebra RS6100, Double Trigger, BT, 2D, BT, ext. bat.
Bluetooth scanner, 2D, imager (SE5500), trigger, Bluetooth, incl.: battery, extended, 735mAh, order separately: charging cradle, operating: -30° up to +50°C
Citizen CBM-920II, LPT
bonprinter , dot-matrix printen, mediabreedte (max): 58mm, printbreedte (max.): 24 columns, snelheid(max): 2.5lps, parallel, incl.: kabel (open kabel uiteinde)
TSC spare battery
Spare battery, 6200 mAh, fits for: Alpha-40L
Zebra connection cable, RS-232
Connection cable, RS-232, length: 2 m, straight, TxD on PIN 2, order separately: power supply, DC cable, power cord
Elo Table Top / Pole Stand, short
Stand, short, height: 12.9 cm, fits for: Elo 10I1, 1002L, 0702L, 1002L, 1502L
Zebra charging-/communication snap-on
Charging-/communication snap-on, interface: USB-C, length: 15 cm, order separately: connection cable (USB-C), fits for: WS50









