Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Zebra Intelligent Cabinet, Extreme, Flat Packed Version
€5.536,55 Excl.BTW
Price Summary
- €6.699,22
- €6.699,22
- €6.699,22
Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Gerelateerde producten
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Onlangs bekeken
Zebra Intelligent Cabinet, Extreme, Flat Packed Version
Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Metapace interface card, ethernet + RS-232
Interface card, ethernet + RS-232, fits for: T-40
CT-E301, USB, 8 dots/mm (203 dpi), cutter, wit
bonprinter , direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): 250 mm/sec., USB (type B), kassa aansluiting, afsnijdmechanisme, desinfecteerbare behuizing, Flash: 8 MB, incl.: stroomvoorziening: (voeding, netsnoer), QSG, kleur: wit
Honeywell hand strap
Hand strap, fits for: EDA51
Identive SCR3310 v2, USB
smart card lezer (ISO 7816), USB, afmetingen (BxHxD): 70x10x70mm
Zebra ribbon, YMCK
Ribbon, YMCK, 625 images (single-sided) or 312 images (dual-sided), fits for: ZXP Series 8, ZXP Series 9
M3 Mobile spare battery
Spare battery, 6700 mAh, fits for: UL20X, UL20W
Labelmate power supply
Power supply, 220-240V, 50 Hz, output: 15 V – 3 A, included with CAT/ UCAT-3/ UCAT-40/ LD series, fits for: CAT, UCAT-3, UCAT-40, LD series
TSC charging station, EU
Charging station, 1 slot, incl.: power supply (EU), fits for: Alpha-4L
Datalogic Powerscan PD9630, 2D, HP, multi-IF, Digimarc, kabel (USB)
handscanner, 2D , imager (high Performance), incl.: trigger, vibratie/ trilling, Digimarc, multi interface (RS232, USB), IP65, IP67, incl.: kabel (USB)
Zebra reserve batterij
Reserve batterij tbv Zebra MT2000, 3.7V, 2400mAh








