Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Zebra Intelligent Cabinet, Extreme, Flat Packed Version
€5.536,55 Excl.BTW
Price Summary
- €6.699,22
- €6.699,22
- €6.699,22
Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Gerelateerde producten
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Onlangs bekeken
Citizen CBM-920II, LPT
bonprinter , dot-matrix printen, mediabreedte (max): 58mm, printbreedte (max.): 24 columns, snelheid(max): 2.5lps, parallel, incl.: kabel (open kabel uiteinde)
Datalogic PM9501, 2D, HP, multi-IF, RB
cordless scanner, industry, 2D, imager (high performance), Green Spot, 3GL, multi-interface (RS232, KBW, USB, RS485), cordless, 433 MHz, IP65, incl.: removable battery, order separately: interface cable, charging/transmitter cradle
Elo Table Top / Pole Stand, short
Stand, short, height: 12.9 cm, fits for: Elo 10I1, 1002L, 0702L, 1002L, 1502L
Datalogic Magellan 9400i, 2D, multi-IF, adaptive scale, Digimarc
built-in scanner, retail, 2D, imager, sapphire glass, medium platter, 5-side, adaptive scale, Shelf Mount, Digimarc, multi-interface (RS232, USB, IBM), aux port, incl.: power supply unit, power cable, order separately: interface cable
Zebra Intelligent Cabinet, Extreme, Flat Packed Version
Intelligent Cabinet Extreme, device capacity 100, 1912 x 1200 x 437mm (HxWxD), 5 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Datalogic stylus, 5 pcs.
Stylus, 5 pcs., incl.: tether, fits for: Falcon X3+
Identiv SDI uTrust 4711F, USB
sim-kaart lezer, RFID lezer, 13.56 MHz (ISO14443, MIFARE, FeliCa, DESFire), contactloos, USB, afmetingen (BxHxD): 126x93x21mm, wit
Zebra RS6100, Double Trigger, BT, 2D, BT, ext. bat.
Bluetooth scanner, 2D, imager (SE5500), trigger, Bluetooth, incl.: battery, extended, 735mAh, order separately: charging cradle, operating: -30° up to +50°C
Datalogic spare battery
Spare battery, 2550 mAh, fits for: GBT4200, GM4200
Zebra power supply, EU, US
Power supply, 75W, 24V, incl.: power cord (EU, US), fits for: ZD410D, ZD420 series, ZD620 series, GX420D, GX420T, GX430T, ZD500








