Intelligent Cabinet Medium, device capacity 40, 1312 x 700 x 437 mm (HxWxD), 3 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU

Zebra Intelligent Cabinet, Medium, Flat Packed Version
€2.170,16 Excl.BTW
Price Summary
- €2.625,89
- €2.625,89
- €2.625,89
Intelligent Cabinet Medium, device capacity 40, 1312 x 700 x 437 mm (HxWxD), 3 Shelves, Material: HPL and Mild Steel, RFID Lock, Keyed Lock, PIN access, WIFI/ 4G optional, Ethernet, Lock with 2 keys, order separatly: PSU
Gerelateerde producten
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Onlangs bekeken
Metapace K-4, zwart
kassalade, opening voorzijde, afmetingen (BxHxD): 245x105x320mm, invoeren: 3 biljet compartimenten (horizontaal), 3 munt compartimenten, 3-pos. Slot, directe printeraansluiting, RJ11, kleur: zwart
Datalogic QuickScan QBT2500, BT, 2D, multi-IF, Digimarc, zwart
handscanner, Bluetooth scanner , 2D , imager, Digimarc, multi interface (RS232, KBW, USB), protection class: IP52, incl.: cradle, apart bestellen, interface kabel, kleur: zwart
Zebra interconnection cable
Interconnection Cable, Connects Cradles to each other to run off one power supply (PWRS-14000-241R) at a maximum of 6 cradles, fits for: PSS Cradle
Zebra ZQ511, BT, WLAN, 8 dots/mm (203 dpi), display, RFID
mobiele printer, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 51mm, snelheid(max): 127 mm/sec., Bluetooth, WLAN (802.11ac), LCD Display, Black Mark Sensor, Gap Sensor, RFID (schrijver), incl.: accu, 3250mAh
Elo IDS Computer Module
Intel Celeron Dual Core 2.2GHz, 1GB DDR2 RAM, 160GB SATA HDD, 4x USB 2.0, 1x Gigabit LAN, Audio, zonder OS, only for Elo xxx0L
Bixolon SPP-C200, 8 dots/mm (203 dpi), USB-C, BT (iOS)
receipt printer, mobile printer, direct thermal, resolution: 8 dots/mm (203 dpi), media width (max.): 58 mm, print width (max.): 48 mm, roll diameter (max.): 40mm, speed (max.): 80 mm/s, connection: USB-C, Bluetooth (iOS), emulation: BXL/POS, RAM: 8 MB, Flash: 4 MB, incl.: cable (USB), belt clip, battery, 3000mAh
M3 Mobile battery door, NFC, extended
Battery door, NFC, fits for: Extended batteries
Zebra expansion module, 2D, Android, 10”
Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET5X (Android, 10”)
Zebra Micro USB Cable
Micro USB cable, ActiveSync, length: 1.22m, fits for: Zebra charging/transmitter cradles
KOAMTAC finger trigger glove, XSmall (R)
KOAMTAC finger trigger glove, XSmall (R), fits for: KDC180
TSC printhead ME240, 8 dots/mm (203dpi)
Printhead (spare) for TSC label printer ME240, resolution 8 dots/mm (203dpi)
Getac Brodit vehicle holder
Getac Brodit vehicle holder, fits for: T800
Brodit holder, TS, TC21, TC26
Holder, tilt swivel, fits for: TC21, TC26








