Kick stand, fits for: XSLATE R12

Zebra kick stand
€155,96 Excl.BTW
Price Summary
- €188,71
- €188,71
- €188,71
Kick stand, fits for: XSLATE R12
Gerelateerde producten
Brodit charging station (MOLEX),MC55, MC65, MC67
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Onlangs bekeken
Datalogic Rubber Boot
Rubber Boot, for Datalogic Falcon X3+, Falcon X3, Falcon X4
iiyama ProLite TW1023ASC-B1P, Projected Capacitive, eMMC, Android, black
Touchcomputer, Touchscreen, Projected Capacitive, 25,7cm (10,1”), resolution: 1280×800 pixels, 1.8 GHz, RAM: 2 GB, eMMC: 16GB, USB (micro-USB, 2x), Bluetooth, Ethernet, Wi-Fi (802.11b/g/n), HDMI, incl.: VESA mount (75×75 mm), 25ms, brightness: 385cd, viewing angle: 160/160°(H/V), contrast: 1000:1, Android (8.1, AOSP), incl.: power supply unit, power cable (EU), QSG, colour: black
Diebold Nixdorf connection cable
Connection cable, Powered-USB to Hosiden (female)
Zebra connection cable, RS-232, freezer
Connection cable, RS-232, freezer, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2
Evolis ribbon, YMCKI
Evolis ribbon, YMCKI RT for cards with magnetic stripe or/and chip, 400 prints per roll
Zebra iPod/iPhone mount
Zebra iPod/iPhone mount, fits for: RFD8500
Magnet stripe kaart, programmed
Pre-programmed magneet strip kaarten met a 5-digit nummer op spoor 2, kleur wit
POSPOLE base pole
Base pole, diamter: 45 mm, default cutout, height: 400 mm, incl.: top cover, bottom cover, 4x M6 50mm screw, 4x 6,4 steel washer, 4x M6 bolt nut, 4x C4.8×16 screw, 1x hex screwdriver, colour: black
Datalogic connection cable, USB
Connection cable, USB, length: 2 m, coiled
M3 Mobiler Trigger, Wearable
Trigger, Wearable , incl.: connection cable, fits for: SM15
CT-E301, USB, 8 dots/mm (203 dpi), cutter, wit
bonprinter , direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 72mm, diameter rol (max.): 83mm, snelheid(max): 250 mm/sec., USB (type B), kassa aansluiting, afsnijdmechanisme, desinfecteerbare behuizing, Flash: 8 MB, incl.: stroomvoorziening: (voeding, netsnoer), QSG, kleur: wit
Diebold Nixdorf interface card, Wi-Fi, Bluetooth
Interface card, Wi-Fi (802.11ac), Bluetooth (5.1)







