portable data collection device, 2D, imager (standard range, SE4770), keypad (34 keys, Functional Numeric), pistol grip, Interactive Sensor, 10,9cm (4,3”), Bluetooth, Wi-Fi (802.11ac), Micro SD-Slot, 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, IP67, incl.: battery, 7000 mAh
Zebra MC9300, 2D, SR, SE4770, BT, Wi-Fi, Func. Num., Gun, IST, Android
€2.644,43 Excl.BTW
Price Summary
- €3.199,76
- €3.199,76
- €3.199,76
portable data collection device, 2D, imager (standard range, SE4770), keypad (34 keys, Functional Numeric), pistol grip, Interactive Sensor, 10,9cm (4,3”), Bluetooth, Wi-Fi (802.11ac), Micro SD-Slot, 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, IP67, incl.: battery, 7000 mAh
Gerelateerde producten
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Onlangs bekeken
Glancetron 8005-1 RS 232 opener
If the cash drawer is not connected via a POS printer but rather via RS-232, the Glancetron interface 8005-1 is required, order separately: power supply
Datalogic connection cable, RS232
Datalogic connection cable, RS232, ICL, PC, length: 4.5 m
Datalogic Scanning USB kabel, TypA, spiraal, 5m
Kabel, USB, Type A, Enhanced, spiraal, Power Off Terminal, 5 met ers
Zebra dual battery charger, 3 slots, EU
Zebra dual battery charger, 3 slots, charges up to 6 batteries, incl.: power supply, power cord (EU), fits for: QL-, QLn, P4T-, ZQ5-Series, ZQ610, ZQ620, ZQ630
ZQ630 Plus, 8 dots/mm (203 dpi), BT (BLE), WLAN
mobiele printer, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 112 mm, printbreedte (max.): 104mm, diameter rol (max.): 66 mm, snelheid(max): 115 mm/sec., Black Mark Sensor, Gap Sensor, aansluiting: mini-USB, Bluetooth (BLE), WLAN (802.11ac), RAM: 256 MB, Flash: 512 MB, incl.: riem clip, schouderriem, accu, 6800 mAh
Zebra RS5100, double sided, BT, 2D, SE4710, BT, black, silver
Bluetooth scanner, warehouse, 2D, imager (SE4710), OCR, trigger, Bluetooth (class 5.2), protection class: IP65, incl.: battery, 480mAh, order separately: charging cradle, charging cable, colour: black, silver
Elo handles
Handles, set (2 pcs.), fits for: 02-Series, 03-Series
Datalogic stand
Stand, collapsible, black, fits for: QD2500
TSC printhead
Printhead, 12 dots/mm (300 dpi), fits for: TTP-346MT
Datalogic stand
Gooseneck stand, colour: black, fits for: GD4520, GD4590, GD4220, GD4290
Metapace note holder
Note holder for Metapace K-2 drawer, incl. spring









