Mounting cleat, fits for: WT6000 external keypad assembly

Zebra mounting cleat
€40,15 Excl.BTW
Price Summary
- €48,58
- €48,58
- €48,58
Mounting cleat, fits for: WT6000 external keypad assembly
Gerelateerde producten
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), MC3300
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit holder, with lock, TC8000
Holder, with closure, fits for: TC8000
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Onlangs bekeken
TSC cutter
Cutter only fits for: TE210, TE310
Mobilis Protective Case
Protective Case, black, Kickstand, Hand Strap, Shoulder Strap, fits for: Galaxy Tab Active 4
TSC PEX-2260L
PEX-2260L, LEFT HAND, 203dpi, 6-INCH WIDE, 3.5-INCH COLOR LCD, DRAM 512MB/FLASH 512MB, GPIO (DB15F)+LPT, USB+RS-232+ETHERNET+USB HOST, EU
Labelmate LD-100-U
Labelmate LD-100-U, Label dispenser, max. label width: 115 mm, label length: 10/20 to 150 mm, speed: 11 cm/sec., for transparent and black labels
TSC cutter
Guillotine cutter module, full cut, fits for: TX200 Series
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
Datalogic connection cable, USB
Connection cable, USB, enhanced, length: 2 m, straight
Datalogic connection cable, powered USB
Datalogic connection cable, powered USB (12 V), length: 2 m, straight
Mobilis shoulder strap
Shoulder strap, 4-Point
Zebra soft case, ZQ320
Soft case, incl.: shoulder strap, fits for: ZQ320
Datalogic rubber boot
Rubber boot, fits for: Skorpio X5







