portable data collection device, 2D, imager, DPM, brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Zebra TC8300, 2D, DPM, BT, Wi-Fi, Android
€2.862,36 Excl.BTW
Price Summary
- €3.463,45
- €3.463,45
- €3.463,45
portable data collection device, 2D, imager, DPM, brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Gerelateerde producten
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit holder, passiv
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Onlangs bekeken
Zebra Z-Select 1000D, label roll
Label roll, thermopaper/thermodirect, uncoated, 76,2×50,8mm, 19mm core, 187 labels/roll, blackmark, BPA free, permanent adhesive, fits for: QLn320
APG insert
Insert, 4 note compartments, lay flat, 8 coin compartments, fits for: ECD417
Citizen parallel inteface
CL-S 521, 621, 631, CL-S700DT parallel interface
PrehKeyTec MCI 84, num., USB, wit
Toetsenbord, programmeerbaar, 84 toetsen, numeriek, USB, incl.: sleutelset, kleur: wit
TSC peel-off module
Peel-off module, incl.: liner take-up rewinder, fits for: TTP-2610MT Series
iiyama bluetooth speaker
Bluetooth speaker, 85dB, 150Hz ~ 16kHz, microphone (3x), USB Type C, AUX, Bluetooth 4.2, control buttons (5x), incl.: cable (USB A/C), Audio, Akku (2200mAh)
KOAMTAC uniVERSE Adaptor module
5pin OTG uniVERSE Adaptor module, fits for: KDC470
Diebold Nixdorf display adapter
display adapter, for rear mount, Vesa 75×75, fits for: Beetle A-series
Zebra Adapter Cable
MC90XX, MC9190-G, MC9200 and MC9190-G Cable Adapter. 5v – 350mA for use with long range scanner LS3408ER






