portable data collection device, 2D, imager, DPM, brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Zebra TC8300, 2D, DPM, BT, Wi-Fi, Android
€2.862,36 Excl.BTW
Price Summary
- €3.463,45
- €3.463,45
- €3.463,45
portable data collection device, 2D, imager, DPM, brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Gerelateerde producten
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit charging station (MOLEX), TS, SM10, SM15
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, TS, SM10, SM15
Holder, tilt swivel, fits for: SM10, SM15 (without protective case)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (with protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
KOAMTAC Charging Cradle
Charging Cradle, for one device and one spare battery, EU, fits for XCover 6 Pro
Citizen power supply EU
power supply, EU, fits for: CBM-910II
Epson TM-T88VII, Fixed Interface, USB, Ethernet, ePOS
receipt printer, direct thermal, 7 dots/mm (180 dpi), media width (max.): 58 mm, 80 mm, print width (max.): 72 mm, roll diameter (max.): 83mm, speed (max.): 500 mm/s, USB (type B), USB Host (2x), Ethernet, mechanical sensor, ESC/POS, ePOS, incl.: power supply unit, power cable (UK), cable cover, paper width adapter, switch cover, black
Elo Bracket Set
Bracket set, 2 brackets, fits for: 1537L, 1593L, 1541L, 1590L
Diebold Nixdorf connection cable, PanelLink 2
Connection cable (PanelLink 2), length: 3m, black
Zebra charging-/communication station, USB, RS232
Charging-/communication station, Ethernet, USB, charges 1x device and 1x spare battery, order separately: power supply, DC cable, power cord (C13), fits for: MC3000, MC3100, MC3200 (spare battery can only be used with adapter cup)
APG Basis
Base plate, MultiPRO 620 interface, 24 V, with Diode, order separately: connection cable (MultiPRO 620), fits for: E3960
APG E3000, kabel, zwart
cash drawer, front opening, 446x109x410mm, 5 note compartments, 8 coin compartments, 2 receipt slots, underdesk mountable, 3-pos. lock, different locking, 24V, incl.: cable (RJ11), colour: black
Printronix platen roller
Platen roller, fits for: T82X8, T83X8
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Honeywell voeding, EU
Voeding, EU, 1.0 A @ 5.2 VDC, 100-240 VAC @ 50-60Hz
Honeywell RAM Mount kit
RAM Mount kit, round base, short arm, 128 mm, ball for vehicle dock rear










