portable data collection device, 2D, imager (medium range), brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Zebra TC8300, 2D, MR, BT, Wi-Fi, Android
€2.698,49 Excl.BTW
Price Summary
- €3.265,17
- €3.265,17
- €3.265,17
portable data collection device, 2D, imager (medium range), brightness: 400cd, 10.5 cm (4”), Bluetooth, Wi-Fi (802.11ac), 800×480 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (8.1), IP65, incl.: battery, 7000 mAh
Gerelateerde producten
Brodit holder, TS, SL10
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)
Brodit vehicle charging station, TS, DL-Axist
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)
Brodit wingnut
Wingnut, for Pedestal Mount
Brodit vehicle charging station, TS, TC5X
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC5X (with protective case)
Brodit voltage converter
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X
Brodit vehicle charging station, TS, locking device, M60
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
Brodit wall/table mount, Alpha-3RW
Wall/table mount, w/o MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging cradle, USB, ET5X (10”)
Charging cradle, USB, fits for: ET5X (10”, with protective case), to be ordered separately: Power supply
Onlangs bekeken
Citizen Interface card, RS-232
interface card, serial, fits for: CT-S600, CT-S800, CL-E700, CT-S601II, CT-S651II, CT-S801II, CT-S851II
Zebra Hardcase
Hard Case with metal belt clip, fits for: QLn420, ZQ630
Zebra RFD90, RFID (UHF)
RFID Reader/Writer, Long range linear polarized Yagi antenna, UHF (800MHz), Bluetooth, WiFi, IP65, SE4850, Reading rate: 1300 tags/sec, incl.: incl.: Battery (7000 mAh, Li-Ion)
Zebra connection cable, RS-232
Connection cable, RS-232, length: 2 m, straight, TxD on PIN 2, order separately: power supply, DC cable, power cord
Zebra docking station
Docking station, HDMI, ethernet, 4x USB, incl.: power supply, DC cable, order separately: power cord (C13), fits for: TC5X
Datalogic Connection Cable USB-A
Connection Cable USB-A, straight, 2m, IP67
Citizen CT-E351, USB, RS232, 8 dots/mm (203 dpi), wit
bonprinter , uitgang voorzijde, direct thermisch, 8 dots/mm (203 dpi), mediabreedte (max): 80 mm, printbreedte (max.): 76 mm, diameter rol (max.): 83mm, snelheid(max): 250 mm/sec., USB, RS232, ESC/POS, incl.: voeding, netsnoer (EU), apart bestellen, interface kabel, kleur: wit
Getac hand strap
Hand strap, rotating, kickstand, fits for: F110G6
ratiotec Smart Protect Plus , disp.
bankbiljetten tester / geld tester (EUR, CHF, GBP), Diversen (eigenschappen/kenmerken), display, echtheidscontrole (UV, IR, MG-characteristics, veiligheidsdraad), interfaces, afmetingen, B 137mm, H 62mm, D 117mm, apart bestellen, batterij
Evolis print head
Print head for Evolis Zenius, Edikio and Primacy
Fingerprint Reader, black
fingerprint reader, connector: USB, 512dpi, fits for: 17L, use 1/1 slots, colour: black








