portable data collection device, keypad (alphanumeric), 8,1 cm (3,2”), USB, Bluetooth, Wi-Fi (802.11ac), resolution: 800×480 pixels, type, Qualcomm Octa Core, 2.2GHz, RAM: 3 GB, Flash: 32 GB, Android (10), IP65, incl.: battery
Zebra WT6300, USB, BT, WLAN, alfa, Android
€2.832,73 Excl.BTW
Price Summary
- €3.427,60
- €3.427,60
- €3.427,60
portable data collection device, keypad (alphanumeric), 8,1 cm (3,2”), USB, Bluetooth, Wi-Fi (802.11ac), resolution: 800×480 pixels, type, Qualcomm Octa Core, 2.2GHz, RAM: 3 GB, Flash: 32 GB, Android (10), IP65, incl.: battery
Gerelateerde producten
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4” with rugged frame)
Brodit holder, passiv, VD
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series
Brodit vehicle holder
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1” with rugged frame)
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, with lock, ET5X (8”) (protective case)
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8”) (protective case)
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Brodit charging station (MOLEX),TC20
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)
Onlangs bekeken
Evolis inktlint
Inktlint, monochrome, geschikt voor: Zenius, Primacy, tot aan 1000 kaarten, kleur: wit
8-batterij oplader
Oplaad station tbv 8 batterijen, tbv standaard en hoge capaciteit, incl. voeding. gelieve ook meebestellen AC netsnoer (kabeurosw) apart, voor Zebra RS507
Labelmate MC-10
Labelmate MC-10, quality label rewinder, core holder: 76 mm, max. roll diameter: 220 mm, max. roll width: 125 mm, speed: 50 cm/sec.
Honeywell rubber boot
Protective Rubber Boot, fits for: CK65 with 6703 scan engine
Plastic cards, 50
White plastic cards without magnetic stripe, box of 50
Evolis inktlint (YMCKO-K)
Evolis kleuren inktlint (YMCKO-K), geschikt voor: Quantum, Quantum+lt;sup+gt;2+lt;/sup+gt;, tbv tot aan 500 kaarten
Elo Wallaby Self-Service Floor Base
Elo Wallaby Self-Service Floor Base
Zebra RFD90, RFID (UHF)
RFID Reader/Writer, Long range linear polarized Yagi antenna, UHF (800MHz), Bluetooth, WiFi, IP65, SE4850, Reading rate: 1300 tags/sec, incl.: incl.: Battery (7000 mAh, Li-Ion)






