Gamber-Johnson vehicle charging station, 3x USB 2.0, 3x USB 3.0, 1x HDMI, 1x VGA, 2x Ethernet, 1x RS232, VESA: 75 x 75, incl.: power supply, fits for: K120 (Tablet)

Getac Gamber-Johnson vehicle charging station
€1.329,79 Excl.BTW
Price Summary
- €1.609,05
- €1.609,05
- €1.609,05
Gamber-Johnson vehicle charging station, 3x USB 2.0, 3x USB 3.0, 1x HDMI, 1x VGA, 2x Ethernet, 1x RS232, VESA: 75 x 75, incl.: power supply, fits for: K120 (Tablet)
Gerelateerde producten
Brodit holder, TS, TC5X
Holder, tilt swivel, fits for: TC5X (without protective case)
Brodit charging station, TC21/26
Charging station, desktop, fits for: Zebra TC21/TC26
Brodit mount, MMC, PM, QLn320
Mount, MultiMoveClip, 2” Pedestal Mount, fits for: QLn320
Brodit holder, with lock, L10
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module
Brodit charging station (MOLEX), locking, MC3300
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300
Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches
Brodit mount, passive, SM10, SM15
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15
Brodit holder, TS, height: 120 mm to 150 mm
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm
Brodit pedestal mountr, 5.0
Pedestal mount 5”, Total length: 132 mm, With ball and wing nut, AMPS holes
Brodit mount, passive, SM10, SM15
Mount, passive, AMPS, fits for: SM10, SM15
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)
Brodit charging station, table
Charging station, incl.: power supply, plugs, fits for: TC7X
Onlangs bekeken
Datalogic connection cable, USB
Connection cable, USB, length: 1.2 m, straight, power supply connector
Magnet stripe kaart, programmed
Pre-programmed magneet strip kaarten met a 5-digit nummer op spoor 2, kleur wit
Datalogic connection cable, USB-C
Connection cable, USB (A/C)
Panasonic hand strap
Hand strap, fits for: TOUGHBOOK S1
Datalogic connection cable, USB
Connection cable, USB, external power supply connector, length: 3 m, straight
Datalogic rubber boot
Rubber boot, order optionally: handstrap, fits for: Memor X3
Zebra Adapter Cable
MC90XX, MC9190-G, MC9200 and MC9190-G Cable Adapter. 5v – 350mA for use with long range scanner LS3408ER
Evolis Netzteil
Power supply, 24V, 3A, for Tattoo2, Tattoo RW, Zenius, Primacy, Pebble4, Dualys3, order separately: power cord
Honeywell modem module
modem module, side mount into USB port, fits for: FlexDock
TSC Peel-Off Module
Peel-Off Module, for TSC TDP-225/TDP-225W






